Search results

Okey thanks Jim

Not work. how do i change encoder stripe? should I calibrate something after the change?

Today it does not work well again. The print in the middle is well cut, but not the ones on the sides. The three box in cut calibration are strange, the one in the middle is perfect, the two on the sides they cut more outwards so one goes right and the other goes left. So no matter how I set...

Now it works! I did as you wrote and also changed the Eps margin from 0.00 to 0.05 in versaworks. hope it works for a while before the next problem comes. thank you so much for the answers!

did / checked both before the decal in the picture was made. I can try to clean with acetone.

should try to fix so it can be seen.

it is perfectly cut up and down, but the sides are wrong. How can there be offset on both sides?

no crack on anyone. can it help when I get media flanges so I can attach the vinyl behind? run loose sheets now. And i did a different print than the black squares, guess this is the problem with the cut? see picture. how fix this? to explain a little better, all the decals are cut differently...

I tried and it does not get better. it pulls to the left as soon as it starts printing.

I have one last problem. when i am going to print and cut it cuts 1-2mm wrong. I have tried setting it up but without success. I have also noticed that the vinyl moves to the side a few millimeters, how do I fix this? uses 3 pinch rollers for 717mm vinyl. Merry Christmas and a Happy New Year to you!

I did as Jim Hancock said, now it works. Thank you so much Jim! And thanks to everyone else who responded!

Okey. How fix this?

I now see that if I write a text in illustrator, the red line is not included. but if I download a vector and print, I get red lines.

okay, how do i do that?

The picture is taken on the first print I made, bought the machine without printheads and has fixed it. All other prints I make get the same red line. Have never used a roland or versaworks before, can it be a setting?

there were two c4131 transistors that were burned and they have been replaced and now it works. Thanks for all the answers!

why do I get the red line in the printout? it is an eps file, the color is otherwise good.

today I have changed the cables from printerhead which worked (blue and black) to the other, and then it prints yellow and red. the cables are checked with a multimeter and are intact. can I check something else?

I only know that four components were broken.