Search results

Most of the issues are caused by the service actions during SMK. I would ask for repair FOC. The Oiler on right side of carriage should apply oil in during movement. Line sensor calibration is available only in service mode. The sound of carriage movement might be caused by wrong belt position...

I was not aware of this annoying process. I’m working for a service partner and have most necessary parts in stock. Why you are not buying from your local support company? They know you and your skills personally, and can provide tips and tricks accordingly. And maybe they propose an onsite if...

Service station caps is K0Q45-67289. it contains 8 pieces. I don’t understand why you are so angry. So unhappy with your service partner? The unit itself doesn’t create that much trouble, if well maintained

Why you are in need of the fucking print head caps? They are coming always with new printheads. If you’d like to store your printheads outside the printer and you don’t kept the caps Wrap them in cellophane wrap.

Clean your substrate partially with IPA and print on this area. If you don’t see the marks it could be plasticizer on substrate surface.

Yes, it’s called linear bearings

AliExpress got tons. 7, 9, 15 mm.

Replace PH for new one and see if this will work.

Could also be an issue with media profile. Try with a generic one.

I would go for SAX motor, since i had several DOA. It could also be carriage pcb or trailing data cable.

Peru would be a nice place to travel to. Provide me your mailadress and I will help you.

There is no way to do the timing adjustment manually. The scanner alignment tool can easily be found on the internet and the scanner is a home grade one. You need the service dongle to set the head parameters if you swap. Where are you located? A FF comprehensive technician should be available...

The only filter in the subtank is the last chance filter in the air line. Subtank issue would affect both M-channels. You can try a subtank maintenance and see if it helps. This is described in user guide. I would go for the printhead itself. If you can access #adjust you can try to raise or...

In your router you should exclude the fixed IPs from being provided to dhcp requests.

Yes. For sure.

Clean your printhead gently with a lint free cloth and let it sit for 15 minutes. Then check if one or more heads build up ink on the nozzle plate. If yes, replace the meniscus filter in carriage.

You will need a set of all ink cartridges, cause they are marked to be intermediate tanks and can’t be used ascink cartridges. To replace the pip you need to take a picture of the sticker on the frame of the sensor. After installing go into diagnostic mode and enter the values in the sensor...

Hardwareplattform of 630 is used in several products (700,800,Z6pro,Z9pro) and at actual stage it behaves stable. Gen4 inks are common since several years and have the advantage of the overcoat which can be unchecked if substrate is laminated. Small text is printed way better thanks to new...

Try booting with a win10 or 7 bootstick and do a chkdsk. Maybe it is able to repair the structure. If disk is really dead, I could send you a new one. Or images to create one on your own.

How far you have dismantled your printer? most probably you have shorted a cable with cover parts. I guess the cable of the inner light. Disconnect the black 6pin connector on the right side on the ceiling of the printer.