Search results

I need to make a full set of trade show panels for a 8' wide curved popup Im not sure which way to produce these.. print onto vinyl, lamiante with a 5mil polycarb and then mount onto thin lexan or print onto Neschen Easypanel, and lamiante I use a Roland VP-540 Any suggestions would be...

this is probably a silly question. I am trying to find the quietest solution for a CNC plus quiet options for the Vacuum Table and Chip Collection. Assuming it couldn't go outside of the building anyone have any advise or recommendations on quiet products?

Roland just introduced the Roland LEJ-640 VersaUV LEJ Hybrid UV-LED Flatbed Inkjet Printer I wonder if it will print directly onto PVC Sintra 6mm or 12mm

its ok.. i assume those shapes are a specialty and only shops near me could achieve such complexity :banghead: :smile:

All of the above.. some rectangles many custom shapes CNC work. holes, very specific panel sizing.. +/- 1mm accuracy 90% of my work is sintra please keep in mind i am looking for a shop near toronto if you cannot deliver me a sign within an hour than you are too far away :( sorry. but my...

Folks I am looking to find a large good sign shop that can handle my crazy requests. must have Flatbed printers (with white) and CNC inhouse. handle large orders in a few days (eg 50 sheets print/cut) be able to do some assembly of pieces (sintra bending) in the Toronto GTA area (closer to...

so far we have had good luck with the machine. I think training would be valuable. but I find trial and error seems to work better in many cases. why cant Seal just provide a series of online tutorials. or atleast a manual that is actually informative.

now why is that.. we are too busy to spend the whole day training. works needs to get done.

I have talked to Brian before. unfortunately I dont have the funds or time available to allocate a day for training..

anyone know how to mount on a laminator and have it bleed off the sides without getting stuck in the rollers. on a substrate that is already the final size

I just got a Seal Base 62 and ive run into this issue.. learning it. when i tried mounting onto some 3mm sintra.. the subtrate is going into the nip and the vinyl is held over it at like 45 degrees and it ends up hitting the safety sensor... and we ended up doing it in slow mode with that really...

i bet if you put a little mirror over it it would work.

I recently acquired a New Seal Base 62 with the roll to roll option. its been about 6 years since i used a laminator.. last time was a GBC Titan with Hot films.. not its cold film.. had no training on this new unit and its been quite the learning curve. Today i laminated about 60' of vinyl...

I heard they were releasing a heat assist roller to help with lamination.

Guys im curious how you guys keep track of all your orders. Do you use Docket Folders?, spreadsheets?, some online thing? software? is it all digital or use paper forms? im running into problems where i have so many items on the go i cant keep track of who is working on what and when something...

Ive been trying to compare the Roland XC-540MT and the Roland VS-540 I think roland is intentionally trying to compare them easily for the XC they list the following Speeds and resolutions 360x360 - 441 ft2/hr 450x360 - 293 ft2/hr 360x720 - 151 ft2/hr 720x720 - 75 ft2/hr 1440x1440...

i actually meant to say 3621 i would like to find something similar but with air release channels

can you please specify a specific product from those brands?

Im trying to find a vinyl Looking for a matte Finish. sticks well to sintra but can be removed easily without any (or much) adhesive being left behind typically is removed after 2 weeks or less) currently using Orajet 3620 and its not bad. but if there is something stickier and more...

Im an interested in onyx Production house.. i currently use versaworks but find it to be buggy.. and i really hate the low res preview. does anyone use it with Roland Versacamm Vp-540?