Search results

@ brian yea there is a fan thats on the rail at the bottom in front of the take up real that came with the kit. with the drape up it caputres what fumes and send them up and out .

the machine get used everyday!!!! i got a problem with shit bein clean OCD.. plus makes for a higher resale value.

well i guess it was to good to be true. fired it up today ran my test draw. did a cleaning. and then a print and the frickin locomotive was back in action:banghead:.. o well at least this time it dident cost any money .

@ mmustafade :thankyou: i try to keep it clean..its like the bentley that ill never have but this cost the same to maintain .lol...

@ negd its been the same as you with phone calls it sux... but the sound has allways been the same untill last night and it went stealth! litteraly. but i will keep everyone posted..

as far as the table goes you can construct that out of alluminum tubing box it in with a box sign cabnet support the middle and caulk it air tight drill hole in side of cabnet get a industial vac and then put a sheet of peg board on top caulk all edges and bang vac table affix rails and screw...

@ artbot thats funny i was just looking at 880 encad on ebay:ROFLMAO:. there a goos way to make a cheap project and if it works then great..

well..... its deff doable its a sick machine and way cheaper than a new flatbed. mabe you can use a jv3 and just have the x axis move the printer on a carrage from front to rear of the substrate. then you dont have to worry about what printer u use it would work as if it was rolling media...

@ chicago I tryed that oil on the deck for the belt i dont like doing that because it tends to attract dust and build up grime. therfore causing it to wear faster with the grit fronm the dirt in the oil underneath the belt. i just clean that deck with 90% isopropyl alcohol at least once a week ...

New Pics

i ue 3 in 1 oil. but to much:omg2: it drops on the roller and makes a 1 ft mark up the print it sux so u clean the rails with alcohol and put oil on my finger and slightly oil the rails then let the head do the rest to smear around . but any other oiling procedures would be nice to know so if...

well i dident change the motor ... and it was allways loud all the time weird right? it just stoped..

ive had mine for a month i love it .. it beats 100.00 bux a cart.

Ok i was speaking to Artbot and we thought it would be a good idea to make a thread about this.. well i started to print a 28ft print. about 3/4 of the way im in the other room and i dident hear that anoying loud noise that printer makes when going right to left. so i was like man that was...

it cost 680.00 shipped, @ wood do you like it?

ill post more pics tomorrow . yea its super clean almost perfict . i think thats y it hates me and allways has problems it likes to be dirty...

question for ya. i started printing a 28 ft print 4 ft wide . now when it started the sound from the y axis motor was as normal anoying sound it allways makes. well there 2 ft left and it got super quiet.....? what the hells up with that? its so quiet i couldent even hear it in the other room i...

New Bulk CMYKx2 Perm chip with resetters Running Durafos ink.

yes i powered down correctly . yes i swaped the cable properly. yes i loaded up the printer correct. went to test draw it started fans and went left as it usually does for test draws but no ink on the paper .. ive done all my own head changes and other forms of matiance on my own with help...

@ artbot i think that is whati did and whenit went to do a test draw it printed nothing ..Hummm.:banghead: do you think i should just keep a eye on it to see if it gets better day by day as it has been doing? +1 on the data swap pic its so simple a cave man can do it !! simple sweet and to...