Search results

My printer is printing magneta for red and the yellow is very poor. Black and Blue Colors are fine. Cleaned and nozzeled check a few times. Also set the software in color mangement too RGB 1998, it was orginally on sRGB IFC61966-21. Open for suggestions on what to try next. It was working...

Was looking for a cheaper alternative to yard signs for a local political candidate. One of my resources had fold over signs a lot cheaper than the traditional yard sigin Have Mutoh VJ 1324 and wanted to if anyone has ever printed this type of sign and is it worth it. What type of material...

Thanks for the reply. I received this message (K) Ink Low; I checked my ink status on my VJ 1324 and it showed a 1 (will assume it is one percent). I then check my black ink bag and it felt like about a 1/3 ink bag was full. I replaced my maintenance station last year and just recleaned my...

Just received a low ink status of 1% on my black ink on my menu, check the bag and it appears to have a least a quarter bag full. Is there a way to double check to see if this to see if the indicator is correct? Also is there a way to reset the ink bag or the indicator? Thanks. EZ Ink...

Been having a problem with my printer wasting a lot of ink. For instance when not in use I have noticed a drop in the amounts of my inks. I do not turn of my machine off , and just put it in sleep mode. The next day the ink cartridges ( I am transitioning from cartridge to the bulk system)...

When I start printing on my large format printer I notice that my printer shakes from side to side when the printer head goes across the media. Placed on flat surface and still does it. Anyone have any experience on what causes this issue on their printers. Thanks, Glenn Combs

Have a client looking for pole banners, but wants to use UV ink only because it doesn't fade. Know of any wholesale printers that can do this job. Flags will be flown in Northern California, bay area. Have tried Soardist, they use a UV coating.

Went to 2024 Expo and not a,Mutoh representative there. I just purchased a used Bulk Cartridge set. Have not tried them out yet. Wanted to clean some in,in tubing, so wanted to know if there is a procedure. I cut open one of my used Cartridges, and it only had a bag. Looked at YTubes could...

I use JDS Industries for Sublimation, solventinljet for Mutoh,and Grimco for I use JDS for Sublimation, Solventinkjet Mutoh, and Grimco for some sign supplies JDS has free shipping for purchases $99, and $200 Solventinkjet. Solvent is coming out Colorado, so it takes 3 days. Grimco and JDS...

Just purchased four used cartridges for VJ 1324 Mutoch. Before I insert them want to clean them and remove any dry ink. Was thinking of using cleaning solvent and syringe Anyone have this experience and would like to,share it. Thanks. Glenn

Yes, the machine engraved the letters on the acrylic Glenn Combs EZ Ink Promotions

I used my engraver to engrave the lettering. Since first time engraving not sure what the difference between CNC router and engraver. The blade I used was brand new, and the speed to my knowledge is non adjustable. The material according to JDS industries that makes it, says I can engrave...

Have a gravograph M40 rotary engraver. Just did my first piece of acrylic media and it look good, but I notice small areas around the lettering that were quite as smooth as the other letters, making the engraving not as uniformed as I would like. I am using a 3.0 general purpose cutting piece...

Big Ben: I have an old Monrach Gullitone 12" paper cutter and tried it, and appears to cut well. What thickness do you recommend and what type of materials could I cut with. Also when cutting it appears to curve the material but only slightly. Thanks. Glenn Combs EZ Ink Promotions...

Registration marks and alignment are all good. The Graphtec arm attempts to read it then stops. Was wondering if anyone else had this similar experience. Thanks. Glenn Combs

Recently purchased a contour cut driver from SAI for my Mutoh VJ 1324 to do contour cutting on Graphtec 6000-60 for stickers and decals. However, when I sent the print to my Graphtec cutter it appears not to read the registration marks. Any one else have this experience. Thanks. Glenn Combs...

Have a gravograph M 40 DV and want to start engraving for plaques and awards. Have review both Johnson Plastics and JDS companies supplies and products, and was interested in buying a cutter (they list at $435.00) for my shop? Is this a good idea? Thanks. Glenn Combs EZ Ink Promotions...

My mat on my graphogravph is losing is adhesiveness to keep flat pieces of material stable. Anything I can apply to restore adhesiveness? Thanks. Glenn Combs EZ Ink Promotions Brentwood, CA