Search results

Here is a link to the AMA clubs in PA. he should not have a problem finding a club to fly with. Jimmy http://www.modelaircraft.org/clubsearch.aspx

Look for a local source with a waterjet. When I was building dragcars I delt a lot with S&W Racecars and they are up there in PA not far from you if I remember correctly and they will cut anything you want on thier water jet. Jimmy

what kind of printer? Jimmy

Are you going to be doing them just for your self or for others? If just for your self, you may find that you are not saving any money once you get everything you need and see the time involved in learning to do this right. If you plan to do them for others good luck. Either way read all you can...

Welcome to the board. Tell us a little about yourself and what you plan to do with the cutter and we can give you better advice on them. Jimmy

The amount is huge for most of us and I would farm it out to someone like Stouse. With that amount I think you could get a great deal. That is still one whole lot of decals. Jimmy

I have a DC4SX and a DC4 would not be a good printer for what you want to do. I would do part of it real well and some of it real poorly. Labels and smaller decals it will do a great job. Small banners ok and printing on clear just fine. The bigger stuff you want to do you need an sovent based...

I do't think you inherit an ability it is just something you are born with and you have it or you don't. We have an artist in out area that is autistic, and has never had any training or interaction with others in the field. He just picked up a pencil one day and what was on the paper at the end...

Just ball parking the square footage and the two colors, I would be about $875 design to done. Jimmy

Welcome from the other side of the planet Virginia. Jimmy

Try introducing yourself and tell us a little about your business to get started.You should do some more research on materials and processes for aluminum signs and that will help you ask better questions. And if you give some more information on what you are going to be using these signs for...

I bought one of these from the local auto body supply house. Use it to get the vinyl off and come back with some rapid remover for the last of the glue and it does a great job. http://www.autobodytoolmart.com/4-eraser-wheel-df-705-p-14354.aspx Jimmy

I have seen a few that let you pick from a couple of fonts, then a couple of colors and lastly a few sizes and it gives a price. Most shopping cart programs will do this but it not by any means design and price like you asked for. My suggestion if you want to go this way is to search the net...

One of the things I do when looking for pics for templates is do a search for the years that are the same on both Ebay Motors and Auto trader. So far I have been able to find what I need. Jimmy

Just for an added resource for the Navy stuff here is a link. http://www.navy.mil/view_ggphotos.asp Jimmy

Welcome from just up the road Virginia. Jimmy

Welcome from Virginia.. :Welcome:

Pick what it is you want to do in the sign industry and start making a list of everything you think you will need as far as tools, materials, equipment and so forth. Then break it out something like below and just add to the list every time you think of an item. Big or small they need to get...

Have not tried the Avery but have run the 3M from other sources than Summa through mine. On this bigger stuff I just farm out the prints, panels are bigger so less seams, and I make more money. Jimmy

Did it for a year or so in the mid 70's and went back to it a little more than 5 years ago. Jimmy