Search results

my edge has been acting funky lately. Today's problem is when I send a job, I'm using white on clear, it will print the registration mark but not the copy. I notice a faint image on the foil of what I'm trying to print. I printed a square of white on its own and it will print it. I tried a...

Now what! Cutting all day with my Graphtec fc7000. Went to do a second cut of previous image. Hit roll2, enter and plotter goes to measure cut area. Goes to top, stops, moves forward a tad and is ready to cut. Did not change a thing. Checked origin and everything set up in production manager and...

Not a bad price at all! Sound like it just needs adjusting and maintenance http://www.ebay.com/itm/GERBER-GSx-Plus-PLOTTER-/152252794468

I recently had the above motherboard repaired. After re installing I noticed that certain keys on the keypad seem to not be working . Do I need to calibrate? Would this have anything to do with it? I was able to locate another keypad assembly to install and no change.

Something quirky is happening today as I'm trying to print with registration marks. when I go to print all the edge wants to do is print the registration marks with no image and if I let it go it wants to just keep printing cropmarks. I'm only printing one copy and it's one color which is spot...

Hmm first for me...set a file up with contour cut and after it prints the registration mark it slews the vinyl about 3 ft then prints the image. I've checked all the settings and they look normal.

I know I have seen a post in this forum for this without purchasing new. Using gas line to replace? Etched vinyl wrapping? Any ideas would be appreciated!

Was wondering if anyone could be of some help. Turned on my edge and at first it kept beeping then was making the sound as if it was printing. Unscrewed the side panel and held the black button inside as I turned it on again. Beeping and printing sound stopped and now all I have are the small...

Is there any other shiny chrome product out there that would conform around rivets besides the Avery brand? I'm needing to go around non removeable rivets. Thank you!

Is anyone using any other USB parallel cable to run their older gerber edges? I'm running flexi 7.6 v2 and I'm thinking the gerber cable will not work without omega software. Any suggestions please?

Looking for the above. Anyone know where I can get hold of one or possibly someone have a non working machine they would be willing to part out?

Hello! In the midst or a transformation here for backup. Have a graphtec 2100-50 plotter that is still a workhorse and has never let me down ( knock on wood) it has a parallel port and a rs 232c port. I purchased the graphtec cable and a rs232 adapter to connect to a 9 pin serial on the back of...

Doing contour cuts with this older plotter and something is off. Do these plotters need calibrated and if so how would I do it. All I need it to do is contour cut me edge print. Sadly my graphtecs main board went out so until new comes in I need to use this. Thank you!

Trying to load spot colors in flexisign pro. I know it's old version but trying something out. Can anyone tell me how to do this? Thank you!

Just got a order for 2x3 sandblasted cedar sign. I used to do these all the time but not so much now. Is there anywhere I can purchase the above or similar material by the foot? Just hate to spend 100 dollars for 20.00 worth material to have the remainder just sit there forever

Just finished running a smaller job on my edge Le and left it on when about 10 minutes later it started a continuous beep. Turned it off unplugged it and turned on and still beeping. Tried a reset but would only go to initializing one time but started beeping again. Now it says nothing on small...

Anyone using this? I had this bright idea to print crop marks with my edge then take it over to my 30in graphtec and contour cut with cutting master. Well that ain't happening! It sends something to plotter but after it does something for a few moments it errors out on me. Plotter shows on...

Yes, extremely old version but I was finally able to get my hands on one that will work on windows 98 in which my edge is hooked up to. Two reasons I purchased this version.... I use flexi right now but want to use the program that has been built ground up for the edge and secondly most members...

I used the original estimate software back in the day, got away from it and now though I'd use it again. I loaded software on the computer that I had previously used before and it will load but my plugins ( which cost separately ) wont work. Contacted Estimate and yes they no longer support this...

Is there any way to purchase a dongle for gerber omega 1.54 & 1.56. Saw the program for sell without the dongle. I know it's early edition but just wanted to mess around with instead of flexi sign which I have now. The omega forsake is a legit program