Search results

Do you have the proper blade selected?

I worked at a shop where I sat about 20ft away from the designer and he would send me emails concerning jobs that were due that day. I was in production so wasn't always at my desk. I could still just walk up and smack him and it's been 7 years lol

Unless it's a smaller image

Thermoflex plus here although I try not to layer it

Thanks for the info! I just ended up grabbing another desktop and have it designated to the gerber edge

Mine does this from time to time. I've done the same thing you mentioned and have not figured it out. Normally I just reset it and if that doesn't stop it I let it beep itself out. It usually stops after a few minutes. Sorry this doesn't help out knowing why.

Gabagooo, don't laugh lol my edge is running on windows 98.

Update... Got her running thru RS232 serial port! Purchased a graphtec cable and a tripplite keyspan, matched up the ports and two dip setting switches and back in business! Thanks for all the help! On to the gerber edge now!

I remember when I was very young my father had a easel set up in our dining room practicing. When I joined the company at 18 they were still lettering but I was making the patterns and hand cutting thru transfer paper then rolling the paint over it and peeling the frisket ( transfer paper )...

Thank you! Looks like it just might work! I have this info but apparently looked over this!

Is anyone using any other USB parallel cable to run their older gerber edges? I'm running flexi 7.6 v2 and I'm thinking the gerber cable will not work without omega software. Any suggestions please?

Thank you Photec!

Looking for the above. Anyone know where I can get hold of one or possibly someone have a non working machine they would be willing to part out?

Jury duty calls today but ports are matched (com 9) and when I hit send I look at my program manager and the gear is turning and says cutting at 0 percent and stays there so now I think it's a matter of the RS232 dip switch settings

I'll be on it first thing in the morning...thanks

I have plugged in the graphtec cable to the RS232c connection on the plotter and the RS232 adapter and the us a to mini b cable into the usb on the laptop. I've tried all ports and get cannot open port on everything I've tried. Am I missing a certain setting?? Not giving up! I've spent hrs...

Thanks for the responses. I'll give it a go and see what happens!

Do you know what brand you used? I'm just trying to get this old plotter to run off my laptop. I'm assuming the Rs232 would be my serial part on the plotter. I was told to get a graphtec cable because of the pin configuration and use a parallel rs232 adapter. I am so not computer savvy...

Hello! In the midst or a transformation here for backup. Have a graphtec 2100-50 plotter that is still a workhorse and has never let me down ( knock on wood) it has a parallel port and a rs 232c port. I purchased the graphtec cable and a rs232 adapter to connect to a 9 pin serial on the back of...

Just watched a video where you go to misc on the top bar and choose setup and it lists drivers then you can choose add. Hope this is a step in the right direction