Search results

Don't think so

I changed the head ranks when I changed over the heads. It still prints really good quality images but just the banding issue. I always print uni direction anyway so thats not an issue. I may have the wrong termanology then, as the banding isn't darker or lighter shades of colour in the...

So its not the network cable as I've just tried a lpt cable and its still banding. Does a worn head cause this problem?

I hope someone can help, and I know banding is something that theres loads of possibilities it can be, but I've tried everything. I have 2 mutoh rockhoppers and one of them has started banding black lines across the media. At first I thought that it was a bit of fluff that had dragged across...

This has been happening for a while. Probably all the time I've used the machine. What ever I print it doesn't come out the exact size. I'm using flexisign rip and lets say if I print a 6x2ft banner it will come out about an inch shorter on the length and a fraction of an inch shorter on the...

Think it may be called a media flange

I think thats what its called. Its the end caps you insert into the roll of banner or vinyl and then slides on to the roll hoder. Its not the black end stops where one is fitted to the holder with a circlip. Any ideas where I can get some, prefer somewhere in the UK. Cheers Mark

Thanks. I think it may be sorted now, while I was waiting for a reply I changed the network address and its just finished a full test print with no problems. Cheers Mark

I'm running an agfajet sherpa 43i from flexisign with a network card. Been running it for 18 months and today it stopped working. I've checked the connections and the network name and address and all fine. It starts to print but then halfway through just stops and says on the control panel...

Can anyone shed some light on this bit please? Cheers Mark

thanks border, worked a treat. Never realised it was there. Now I know why my other machine doesn't sense the low inks, because theyre after market cartridges.

Sorry if this sounds stupid. But what flag? Cheers Mark

Looking for a bit of help regarding converting my mutoh to solvent. I already have one thats converted to run eco solvent inks and I've just bought another one to convert in the same way. The first one I bought is actually an AGFA jet sherpa 43i and the second is a MUTOH falcon, both 6 colour...

Hi All, I'm new to large format printers and am a bit unsure of icc profiles. I'm running flexi 7.5 and I have a agfajet sherpa 43i (mutoh rj6000 /rj6100) and has been converted to eco solvent inks. I'm in need of icc profiles for this 6 colour printer. Now because its not originally an eco...

My rj6100 has been converted to eco solvent ink. Up until recently wasn't printing, but with the help from people on this forum have managed to get it printing again. Just for testing it out I've just been printing on standard cut vinyl and its printing a treat. Takes a while to dry but...

Have you not thought about converting it to outdoor solvent printing, could be a cheaper option than a roland Cheers Mark

Welcome from the UK

Welcome from the UK

Welcome from the UK

Does anyone have a link to the fuses on radioshack site? I've read a few posts that you can get them from there but I can't find them. Cheers Mark