Search results

I'm sure certain thicknesses of VHB would lift the letters. Mine was pretty thin. The screws helped draw it tight too.

I'm not sure if this is still available, but years ago I would use a 1/2" PVC that was exterior grade, supplied by Harbor Sales. You could probably get away with the interior grade if you are painting the faces and sides of the letters though. I've done signs exactly like the one in the pic...

I always try to avoid applying vinyl to black trim pieces, especially near windows. Trimming it is difficult and getting it to stay stuck is a crapshoot. I think it is acceptable for any window trim to be "missing" the graphic. Even so, applying that section with pre-mask isn't the easiest...

Substance Icon 440LSE is another option.

Get a cheap economy one and cut the pole?

Are you using 60º blades? Did maybe the cutting strip get ruined?

I would do as one piece, hinge in the middle, similar to your method #1 Side Hinge install. The only difference is I would lightly apply to the outward curve laterally on both sides of your hinge before going back and squeegeeing above and below that outward curve. If you completely squeegee...

Displays2Go, Orbus, Showdown Displays

Thank you!!

Not an expert here... just a thought. Shouldn't ADA always be mounted with double sided tape as they are permanent signs? Using a magnetic back would somewhat render them as temporary signs. Doesn't seem like a good idea that you could move an ADA sign easily if it is only held by a magnet.

Any ideas on Salon G'onna? The only thing I have in my system that is close is Andalusia, but that's just not it!

Looking for any available Roland tech in the Pittsburgh PA area. My VS-540i has been showing some missing nozzles in the Cyan and banding when printing solid blues. I was quoted $3,200 for a print head and cap assembly replacement. It's been a few years since I've had any Roland machines that...

Any ideas on the bottom font? "ACCESS CONTROL SYSTEMS" Thanks in advance!

Hello all, we run small batches of 22x28 posters currently using Sihl Glamour S Satin photoboard on our Roland VS540i, and just like most media on the Roland, print quality is brilliant, but it is slow. I'm looking for a clone of this material that would be Aqueous printable to run through our...

Good idea on the heat assist. I can def try that. The perf is Kapco brand so it ships unbranded/un-named.

I'm giving a second shot to installing a cargo van rear window with laminated perf... the first attempt resulted in small wrinkles/tunneling in the laminate but not the perf. The laminate/no laminate always seems to be up for debate. At my previous companies, we always installed perf with no...

Hey all! If anyone can make suggestions here... We are running two Epson aqueous printers and a Roland print/cut. Currently we don't have the option to print white ink. We also can't successfully direct print magnetic material. That being said, we do a lot of 2nd surface graphics requiring a...