Search results

OK, Let's assume these signs are the bomb, UL, great design, light well, good quality, even the customer was easy because he ordered the same style he saw from a previous job, OK, so I get these in my shop, have an install day set to 3 days before Grand Opening & open up the crate & find 2...

Flexi starter is just a bridge program meant for between your design program & your cutter, you need to design & set up your files in Adobe illustrator or Corell Draw then import them into FS to cut on your cutter, otherwise you are going to drive yourself crazy trying to make it do something it...

I just did a 3' x 14' 3850 print on my VP 540, it is a red & white 3d logo with black block out all around it. I set veraworks to dry for 30 minutes before it went back to origin, & the print hit dead on the second time, unreal to watch! The sign is located directly across from my shop so I...

I think you nailed it on the first try, GREAT JOB!

By the way, my grommet set up is from Glantz, but looks similar to the one you posted.

Hey jill, I put grommets in that stuff all the time with the set up you are asking about, I have had no problems. Bill

Do yourself a favor & use 3/16"! The thinner polycarbs can bow in at that length. You don't want to know how I found this out-:banghead:

I have a realtor block from Verizon installed on my shop phone.

:goodpost:

Thoughts & prayers, stay strong!

OK, Here we go again, I have this set up & it uses your hand held circular saw, it can easily cut any sign substrate you can think of, & it does it quickly & straight as an arrow, you just have to clean the bur off of the edge which takes about a minute or less. Check it out, or not it is up to...

Batch, I recommend a Roland VP 540, it has a vinyl cutter built in & makes very nice prints, I have had one for over 18 months & have had great success with many different types of print/cut jobs, if your focus is on having an all around machine to cover many bases, print banners, make non...

Take a picture & post it, sounds like a custom cabinet, but you can have one made, better to post a picture.

not cool if you need the stuff real bad for a job!

Dan is right, ask every possible question you can, if it was me they were dealing with, the first question I would have asked is WHO IS PAYING FOR 1 DAY SHIPPING? If they insisted I pay, I would order it from someone else just to keep them from getting the sale. And they would have lost my...

:goodpost:

http://www.canstockphoto.com/

combination all no problem

If you design in illy you can just get Flexi Letter from here http://www.masterwarehouse.com/indexg.html?gclid=CM2X68mkpKECFd1n5QodbAysvg $199.00, Good luck

Nice!