Search results

SJM, since you do not live in the United States, you wouldn't understand, the Military here is a big thing, and respected by Most that live here in the States, It is considered an honor to die for our country, for Freedom, and please do not disrespect Killers thread... //chopper

I do not always get 100% match up but it is not off enough to cause any problems maybe a 1/32 to 1/16 inch, but that is not going roll to roll I manly do smaller work say 8-10-20-40 ft long stuff. //chopper

Killer, I want to thank you for being a patriot.... what you have done means a lot to the ones who serve this great nation... it is nice to know that there are people like yourself who give to others selflessly, It makes me proud to know that you are a great American, it is not to often that...

I don't know why all of you use a sled, craft paper etc... I web the machine pull the lam around the top roll set the rollers to zero, then depress the feed pedal, check to see if it is feeding straight, ( look for wrinkles) adjust feed presure accordingly I run the laminator with as little pull...

This is some of the best advise I have ever read here..... kinda hard say it any better... //chopper

I use the wimpy line..... I will gladly pay you Tuesday for a hamburger today.... of course you could insert desired product in place of "hamburger" //chopper

I understand, and by no means do I mean that you shouldn't go after arlon, but in the process you should switch to a cast material and I think your problems will go away, //chopper

this is why I do not use the cheap stuff, I use the 6000 series with air release and I have never had an issue, I how ever had problems with Oracal but it was the opposite, it was sticking to hard if you were wraping a job and it touched the surface it was all over you couldn't snap it back off...

you will never get a true red out of a cmyk machine it will always be on the orange side, since I switched to triangle ink I get better reds, but not true reds at least with the rolands this is true... //chopper

no, it is true, that they see color differences better, but not better designers.. //chopper

on these race cars you would be lucky to get them to last the whole season so I wouldn't worry about 3-4 years, also I have printed graphics that have been out for over 5 years and still look as good as when they were applied, so you might be off on your 3-4 year figure.. //chopper

Pat it looks like it could be out of creative banner www.creativebanner.com //chopper

seems the problem is not the laminate but the laminator, I have run both types of laminate through my machine and there is no flipping belts and such....but I would recommend arlon laminate. //chopper

I think I would try to deal with them before you go that route once you piss them off it will be to late...take the higher road here you wont regret it,..... as far as the air goes did they give you a warning that the power was going to be off? if so you should have disconnected the ac and other...

not quite sure I understand what you are looking for but here is an online chart, color will very a bit from your monitor but it will get you into the ball park, hope this is what you need .....www.d-zignsinc.com/view/pantone.html //chopper

as stated a picture would be nice, but it sounds like some misfiring print heads, or plugged nozzles when they get plugged they will fire off to the side instead of straight down, might want to soak the heads clean the wipers etc. and give it another try.. //chopper

this is what you get when you feed the sticker monkeys.... //chopper

Stickermonkey, I didn't judge you, professionally or other wise but if you feel that way so be it I just stated why I do not reply very often anymore,and why some are not so nice, and you get upset, do you want the truth or more sugar? this is where the problem lies you ask why and people reply...

I find this to be an interesting subject,... I don't come here very often any more for several reasons, one is the opposite, of what you are stating, I think things are not as honest as they should be, to sugar coated if you will, the second is I spend 12 to 16 hrs a day running my business...

yep... I am Honest //chopper