Search results

I can't figure this one out, all of my greys have decided to add a pink hue to them. I have checked everything possible. SC-545EX - 6 color, of course. Flexi 7.6v2. The test print looks fine. Some deflected nozzles, but nothing extreme to make this color shift. All inks are full. I...

So nieve to think that a pair of vice grips will be able to grip a bolt this small and be able to remove it under that much pressure. Of course it will hold the bolt, but remove it? Don't think so.

Hiring a real tech resulted in my head bolt being stripped on my other printer, even though he was "properly trained". This is why I am doing it myself from this point forward. I apparently, being self trained is as good as being properly trained in this case.

Why did you recommend vise grips to remove a bolt thats not even possible to be gripped with vice grips, if you represent roland and seemingly should know how to fix the issue because of this representation? Seems quite the same. Anyone that has actually changed a head, knows exactly what...

Since many people will read this post later on, please don't use any of the recommendations above (except the dremel tool, which MAY work but is still very very aggressive for this job), they will not work for the job at hand. Some of these recommendations are absurb and shows that no one has...

Check the dampers and cap tops, this could be a damper problem for sure. I can't see the pic very well though.

I see that no one here has changed a head on a roland and knows what I am talking about, lol. Thanks for the advice though, but unfortunately most of these really don't help in this situation. It's much more technical as the head on the bolt is incredibly small. Even a cutting wheel on a...

I'm not sure what a clearance drill is? To get a drill bit in there around the other heads, would be nearly impossible without doing damage? Have you done this technique before on an actual roland machine, or is this just a random recommendation?

These bolts are so sensitive to being stripped. Well, I have stripped one of the small screw heads that hold in the head. Does anyone have any advice on how to get the head out with the stripped bolt? What's the easiest method to get the head out? Has anyone stripped one? This one is...

I have a new summa dc4sx and I cannot get it to do what I want it to do in Flexi 8.1v1. I am printing onto clear and want to underbase the color with another color. I have been using the "duotone" option in flexi and have also tried the underbase option briefly. Flexi is telling the printer...

Anyone else?

OEM or nothing :)

Is anyone running this printer that is here? If so, what is your experience with it? Are print times slow? How is the white on clear vinyl? Overall impressions? I may jump into one of these printers, but can't find much information on it. They supposedly changed the ink around to be a...

You could be opening a HUGE can of worms to try to convert that printer back to something that runs like an OEM one, especially if you are dealing with ink converting... Huge as in, replacing all of the parts that the ink has touched.

Yes, it does work with Flexi 7.6v2, under the cx-300 setup. It will need some settings changed ONLY on the printer to make it work. Such as flipping the image 90 degrees, and allowing the printer to receive the commands from Flexi. It's all user menu things.

Wasn't my question, but thanks.

Does anyone here have any experience with this setup? Can I simply use the setup for the Cx-300 within Flexi? I have purchased a gx-300 and it will be here on Thursday. Thanks!

Go with the daige. Works great, reliable and is easy to work on if anything goes wrong.

I will personally never switch from Roland inks, the risk involved isn't worth the benefits of saving a few bucks. We have all been trained to use only roland inks in these machines, so I will continue to do so :)

Same machine body, different guts. As cinemasign mentioned, one only prints, and one prints and cuts.