Search results

JUST A GUESS, but the firmware writes to an eprom some types are erasable & some are WORM (write once read many) unless someone is much better versed than i am, i would approach with caution.

Some of the refurbishers leave the windows installation in an odd state. I blame convoluted and confusing Microsoft rules for those odd licenses forcrefurbishers remember they did NOT allow processor I’d to be stored (so you retained your license until windows 10

it may depend on the state of the windows install after the refurbish process. I find it very odd he says it has no Ethernet adapter windows still has to create a “usb printing support” device in order to have a port to send jobs to

Ok. I answered your question without looking up your model printer. assuming it was printing with the old pc it will print with the new one (1) test the USB port you are go8ng to use. plug a flash drive into the usb you are. Going to use. does it mount the flash drive & give you a drive letter...

You can install and configure the usb Ethernet adapter without taking the cover off the computer either way you need an Ethernet cable get the adapter we will talk you through setting it up

https://www.amazon.com/USB-Ethernet-Adapter-Gigabit-Switch/dp/B09GRL3VCN/ref=sr_1_1?crid=32HYVUSEYY2XC&dib=eyJ2IjoiMSJ9.K27jUa-yk0kiU3qmPPA4XkhZZDVQ_wMsm4O9ERYM_2cz3axJVtZalJqRgdB8Rr5XgDRIfrvIMirrjrJF5lXS4eIQnFZv2_eHBNJUwawjcJx-APSRZt5_v4eL4efd77dTwshxkTkPbCRgOqV4qhNwiLHr7YkEGLy1-kwGQ5juSocddr2E1...

https://www.amazon.com/TOTOVIN-Broadcom-NetXtreme-1000Mbps-Gigabit/dp/B076HHS1WF/ref=sr_1_2_sspa?crid=1M35Y1TUO6JH9&dib=eyJ2IjoiMSJ9._nI5RiFcL6jvqR_zMoV_RE3pkmpJN2nVawiALdhgXKzIHcBtVF3weLRDBIGnXBpmffho4qTKTPRvXNvEBVhjGCio8SAugeNVp6HJnfyQqhmGJ_3NlY3Xw_0hGMd0XWBvQ_8Y7mboyE2O2noRDQmEwyJCjETJ_HHbjuHt...

you MUST have an ethernet port LOOKS LIKE A BIG TELEPHONE CONNECTOR if you bought a real oddball you can add. one for $20 or buy a USB/ETHERNET adapter for $20.

Couldn’t agree more. there is absolutely no downside to shaking the cartridges ALL of mine (Roland, Mutoh, Eason) get shaken every other day ABONUS will bevwnen you do a reprint months later & your colors are much moreconsistent

I never heard of enroute lite

that kind of repair can be an exercise in patience, but, with the price of the motor, well worth it.

too bad he can't go first and match the paint to his output.

Do you need a parts machine? we have a 1204 (not a G) we bought in Massachusetts replaced system board(we have a whole set of good spare boards & a print carriage) we have not touched it since my wife’s medical problems. we re in Englishtown, nj (exit 9 of turnpike)

your profile says Central America. What country? 110v/60 hz or 220v/50 hz? is the machine properly set for local power? what battery backup? (Picture of model number tag, please) is it correct for your local power? MANY of the better units have a set of dip switches that let you “localize”;(set...

If it happens REPEATEDLY consider the possibility that the UPS (battery backup) is not actually capable of powering the printer under load. Try plugging directly to line power and see what happens before you accidentally damage the printer electronics.

I am not quite sure what dropping color means exactly can you post couple pictures? Or a video clip of the problem

smoke jaguar says the mimaki UV’s flush out fairly well but if you have never refurb’ed a printer before you could easily get in over your head. In the long run you are probably better off buying one that you can See a test print come out of the machine

Or that captop misalignment was misdiagnosed 3 times, or a slight suction leak (bad o ring) has been making the cyan ink a problem child.

I called my attorney a f**king idiot today when he told me he “needed copilot” ( he views it as a substitute for having an employee with half a brain.) for a tiny law office, I can’t imagine anything that will benefit them less i imagine in a year or two there will be “add on packs” like...