Search results

I have a customer wanting some business forms. Here's the specs: 5.5 x 8 Two part carbonless ( white/yellow ) Red consecutive numbering Top spiral bound 40 pads of 100 sets Having a hard time finding someone who can do the spiral binding on these....most have glued binding. Anyone here make...

just can't find it. the little dot under the "a" shouldn't be there

I want to try either Oracal 3751ra or 3951ra Looking for a 30" 10 yard roll. Are there any suppliers that sells short rolls of either and the 290 laminate? Thanks, Tony

Seems like I've used this one in the past. Scanned it off a hat, so it's distorted enough wtfont didn't find it. Thanks, Tony

Tried searching for an answer, but no luck. I have used Arlon 6000x, and the 4560gtx, then switched to 3m 180c and 8518 lam, and IJ35c and 8509 lam for piece of mind thinking it's the best. Occasionally have had some problems with peeling of all the digital brands I've tried. This morning a...

I set up versaworks to print about a 3' piece with cropmarks, and print only. (done it a million times) Went to get a sandwich, came back and it was about an inch from being done. It was 99 percent printed but when I looked at the screen, it still said 0 percent on the progress bar. Never...

Is there a trade printer for Holographic cards? I have several printers that I normally use, but don't think they do them. Thanks, Tony

Dont have it on my computer, and what the font didn't recognize it either....thank you

Pretty sure I have this one somewhere...but can't find it. Thanks!

Has anyone tried one of these? http://www.ebay.com/itm/Holder-Cutting-Plotter-Flat-Vinyl-Cutter-Blade-Holder-Paper-Carton-Glass-/120897828365?pt=LH_DefaultDomain_0&hash=item1c2612760d Doesn't really say what it is or does, but it looks like maybe the purple one is a pen, and the blue one may...

What's the favorite magnet material. I have been using the .030 Magnum. Just checked with my supplier and was told there are a couple thicker versions up to .060 , but you have to buy four rolls at a time. Don't need four...the last roll I got was in 2010. Sure seems like the stuff used to be...

I'm quoting a "replacement" billboard banner, and in the past, I've only installed with pole pockets, poles and ratchet straps. This one is on the side of a building, and they built a 2x4 frame for the parimeter. The banner has pole pockets and poles, and they used some metal clips mounted to...

A customer wants silver lettering in the back side windows of a Yukon. I don't have any cast silver, and don't want to order a short roll for 3 feet of material. I do have some 3m3680 translucent vinyl left over from another job. The windows are flat, so I'm wondering why this film won't work...

When I bring a print/cut file into Versaworks as a pdf file, it will sometimes print little segments of the magenta cut line as part of the graphic. The cut line is there only as a cut line, it shows the marching ants just like it should. Not sure why this happens. I like the way pdf's print...

I'm quoting a job looking for an exterior notice board with locking cover. It could have a chalkboard, dry erase board, or cork board inside. They want to be able to change it themselves, but don't want the letter track system. I could be lit or they can shine a light on it. (not backlit)...

This is a double post....also in the General Software section. Pantone Plus ? I have an old Pantone Color guide 1000, and recently ordered the Pantone Plus to cmyk coated and uncoated guide. The Pantone Plus guide came with Pantone Color Manager software...

I have an old Pantone Color guide 1000, and recently ordered the Pantone Plus to cmyk coated and uncoated guide. The Pantone Plus guide came with Pantone Color Manager software. I need a palette for use in Corel Draw....and wondering if this software will create this palette, or if there is...

Next time I see one of these, I will be slowing down for sure > > > http://www.angelfire.com/ak2/intelligencerreport/speed_sign.html

Is there any printable materials for trade show booths, that will stick itself to the carpet like velcro? While I'm wondering, contour cuttable would be cool too :) It's too late for this job, just wondering if anything like this out there for next time. Thanks, Tony

Roland Versacamm sp300v and Versaworks 4.0 When doing a print and cut on small labels, is there a setting for optimizing the cutting order? It doesn't cut them in order...it skips around from here to there. These are small ovals of different colors that were duplicated in the original artwork...