Search results

Looking for info on this post and panel system. There are two signs, one of top of the other, and they need replaced. Looks like the signs are slid into a slot from the top, and a flat cap at the top of each post. Don't see any screws holding the trim around the faces on....that would be too...

I have a customer with a new black vehicle. His old truck has lime/apple green vinyl, and he's looking for something brighter. He saw the fluorescents in my color chart and said "like that" After telling him they only last about a year, he's still wanting something brighter than lime green. I've...

It shouldn't have the grunge....any ideas? Thank you!

I'm working up a quote and the sign will require letter track with 10" tall white numbers on 12" tall clear background. My suppliers offer red and black, but didn't see white. Will need three of each 0-9 12" clear background 10" tall white numbers Anyone know if there is a supplier for these...

Recently had a customer that wanted to cover a door so he could still see out, but others can't really see mess inside a store room. We decided on trying 70/30 perf with optically clear laminate. He also decided to leave the perf unprinted and white. You could still see through it from both...

any one know this one? Thank you

Tried to do a search on the subject, but S101 is giving me an error. I have a contour cut decal to put on the hood of a truck that's about 28" in size. The truck was wrapped a couple years ago by another shop. What if they want to remove just the decal I'm installing? Will the removal of my...

I'm quoting a job for a small sign that will be mounted on a steel pole. Never done a steel pole...only wooden posts. I have a fabrication shop lined up, but need to know the proper way to build the pole. There was a sign there before, so the concrete and studs are in place. It has conduit in...

wtf can't seem to find this one, maybe it's too blurry. thank you!

Have been using oracal 290 gloss laminate over digital prints and about to order another roll. For a few more dollars, I can get the gf optically clear laminate. Any reason not to use the gf optically clear on everything in place of the regular 290? The specs seem to be the same except for the...

have some similar ones, but not finding it. Thanks..

Need to quote using perf on an interior door for one way vision purposes. Looking for a short roll of 30" material to run through the Roland sp300v. Would need to have a decent life expectancy....3/4 years if possible, just don't want a 1 year product. Don't think the customer really cares if...

One of my customers is having some shirts printed. I had cmyk gold in his artwork, and the screen printer has it as super gold. It looks more like sunflower yellow in their proof. So my question is: Is super gold ink gold color, or is it more like sunflower yellow? Thank you!

Not a very good image, but all I have to work with. Have a few similar matches, but not finding this one. WTF didn't find it either. Thanks for the help. Tony

I've been wanting to try a Sig Squeegee for a while. The Daige laminator I bought new in 03 broke some teeth off a gear today. I think the sled hit the edge of the exit ramp coming out of the rollers and before I realised it, the machine popped and the rollers stopped turning. Sent off an email...

Pulled up a job today I have printed several times that has a dark grey background. Set it to print, came back and the dark grey is brown. Did a nozzle check and the black isn't very good, but I knew it wouldn't be. Had a head strike a few years ago, and some nozzles havn't fired since, but it...

Sorry for the poor quality of the customer supplied image. I've looked through my fonts, but might have missed it. As you can probably tell...it has an outline. Thank you in advance.

My sp300v won't read the material width today. Did a search and found the cable may be at fault, or the material width sensor might be dirty. How do you get to this sensor to clean it? When I go into cleaning mode, the heads move over to the left cover, but the sensor isn't accessable. Thank you

Found a couple similar, but need to match new lettering with other signs. fyi....the bottom of the "v" is curling up. Thanks, Tony

Thanks for any help.