Search results

You could also do with replacing your black/cyan head. It has a lot of nozzle deflection so you will never get a really good print with it the way it is

Have also sent you an email, or you can use the private messages on here

Did you try doing a powerful clean from the control panel? That will let you know if ink is flowing through the head properly. If no ink comes out into the waste bottle then it is a problem with the ink getting through the heads, and not a mainboard problem

Did you replace the print head? If you run a powerful clean look to see if there is ink coming out into the waste bottle. If there isn't then the head is blocked. It could be a mainboard problem, or the print carriage board has failed, but this is less common. I do repairs to mainboards if you...

After 2 years in storage you have basically no chance of ever getting the heads back working well enough to print. I wouldn't waste any time or money on trying to get it to work, just keep it for spares for you 540 as a lot of the parts are the same on both of them I would swap over the...

They are small rectangular ones about 8mm long. White, with metal at each end and are in white plastic holders

There are two fuses on the mainboard. They are small ones in white holders. If you look for the two large metal heatsinks, go down from them and across to right next to the cable sockets they are there

I would bet on a mainboard problem. If ink is coming out on the cleaning, but not on the print, then the heads aren't getting the correct signals to make them fire. Head fuse is most likely, but could also be transistors or the main board has failed or a bad print carriage board. You really need...

Or using AI to make those horrible generic cartoony images

But he is 'apparently' turning over a million a year from it :D

It looks like you have had a head strike that has distorted the head, either that or it is delaminating. Try doing a good manual clean and inspection as well in case there is something stuck to the face of the head. It is also worth replacing the encoder strip and sensor as they don't cost a...

Oh he deleted his post with the made up sales figures on it after Victor showed how much traffic his website actually gets : D

In any case, you are wrong about one thing. 90% of the people on here do run sign businesses, so know how to do their own design work. None of them have been wowed and begged you to buy the site have they? This is the mistake you made. You thought the website would appeal to proper signmakers...

You seem to be a bit confused. One minute you can't afford to promote your website that has hardly any traffic, the next you are employing 8 people on $50K a year each and have a sales team and are making millions from your amazing AI designs? If your sales are coming from the amazing website...

And he is turning over a million a year, but claims he can't afford to advertise it properly to grow sales...

Well according to him he is turning over around a million a year from it, so should be running at at least £500K a year profit from that :D

So I am interested. How much do you think your website is worth, given the million$ a year turnover?

Well lets face it anyone can make a list of 'sales' in ten minutes. Doesn't mean any of them actually happened

So after your edit... so you are turning over what, a million a year from the website? And never thought to mention this before? If you are making that much off it why do you want to sell it ? Something doesn't add up. And the designs are still awful. How do those jpegs scale up when someone...