Search results

Sabic Polymershapes, ND Graphics, All Graphic Supplies. But these 3 have locations close to you.

I'll make this super simple for you. Use three different colors of cut vinyl. Preferably a cast vinyl. Then setup the file with layers and registration boxes. When you setup your registration boxes don't move any of your artwork or boxes. I usually put each color on it's own layer and the...

I think he may mean because there is a white dude there. I am going to guess this is in Thailand, maybe his parents live there or more than likely just a dude who is travelling and needed some cash, so he got a job for a bit. That video is pretty awesome though. I love manufacturing videos...

Not sure if you are ranting, or just yelling at all of us who deal with the same shit lol?

Check out Factor Forms, they are a trade only printer. They have a branch in Victoria and Vancouver.

Had the exact same thing happen with our RS a few years back. Apparently, like you said you need to calibrate the roll pressure. I'm sure your dealer would have a tech who could do it, or you could purchase a push pull scale and do it yourself. Here is a video from RS about it. For us at the...

I think I am in the minority here but I actually don't mind getting these calls. It actually brings a little bit of joy to my day. I normally get the ones for health care insurance and lower your credit card interest rates. I actually have fake name with a proper sequential credit card number...

Cut a piece of 2x4 or scrape wood as a spacer. Then laser level with horizontal and vertical lines. I'd use VHB tape to mount them up.

Not for that price. I have the same cutter to use for smaller stuff instead of my VS-640, and it's a great little machine. I haven't had a single issue with it since I have owned it. However I paid $1900CAD new for it and this guy wants like $1500CAD. Not gonna happen.

At times when I have needed a bigger space I have talked to some of my larger clients who have big shops. A lot of the time their shop areas are not always being completely used. You should be able to work something out with them to use their space.

I usually don't try to "sell" it to much as I don't really like doing it anyway. Anytime they ask for removal I tell them it's my hourly rate and I cannot quote how long it will take. I tell them I won't even be able to give them a rough estimate of time as there are a lot of factors involved...

1. I think it's either you have both sets of info or you have none. ctrl+u turns it on/off, or View -> SmartGuides. 2. I have never seen the eye dropper show the color value as you hover over and object. I don't think it's possible but I may be wrong. 3. ctrl+m gives you the move option so you...

I read through all of the replies just to make sure no one else mentioned the chemical guys bottles and the very last one of course it is there. Anyway, I have been using these bottles and I must have bought these at least 3 years ago. Still working strong without any issues. The big one that...

I think it's a little overkill to be using the Arlon SLX vinyl for this but if it's just scrap you are using up sure why not. Not sure why you would trim an 1/8" from the edge or wrap around the ACM. I'd just take my knife and trim along the edge. If you are really worried then just put some...

There is a banner material that I use that does the exact same thing if I load the material without gloves on. Put on some gloves and any parts you have touched without cut off. Then print and see if that fixes the problem.

I normally just let my main clients know that I will be away for set amount of time and they will usually place an order before I leave to have completed and they have no problem with that. Normally I take at minimum a one month vacation out of the country and usually try to get away a couple of...

You should probably re read the MSDS on this stuff. I use it all the time when removing. Always use gloves and a mask though, probably should have safety glasses on as well but then always fog up on me.

Thanks for all of the information guys. I think I am just going to pass on the sign part as they need it done fairly quickly and while my supplier does sell the Cooley Brite material they don't have it in stock locally. While I can easily take the thing apart and figure it out, if I end up...

So first let me say I don't really do any building signage at all, mainly I do vehicle decals and smaller signage. Usually if someone wants something change on a building sign I would have them remove the lexan and I would apply the graphics and they would have it put back in. That being said...

Have you actually seen the fencing? From the photo it just looks like mesh banner with post in the ground to mount the banner material to. If you actually seen it you would obviously know better as the photo is pretty small. Looking at the right section of the blue part of the photo it looks...