Search results

Anyone know where I can find a higher quality file of this image? Thanks

Leave the printer off.

Yes, I know this is an older thread but it sure helped out today. I have printed a few 2 sided banners with my mutoh before but today I kept comming up with the out of media error. It must be a color issue as the part of the first side image that passes over the sensor was solid black. I tried...

Thanks, that's it.

Any ideas? The best I can find is Pegasus but it is way too thin. Thanks

I found 10 different files under: C:\Program Files\FlexiSIGN-PRO 8.1v1\Samples\Pantone(R)

Anybody seen this site? I wonder if aurora and others know about it. http://www.softentheskyline.com/index.php?target=desc&progid=14984

Thanks dbenec, I'll give that a try.

I had a potential client come in last week and wanted a few paint thur stencils made. I don't want to cut all the way thru with my Graphtec and mess up the cutting strip so I told him I couldn't do it for him. This morning I saw a cricut commercial on the TV and it got me thinking...has anyone...

If the cartridges were removed when the machine was off would the cards count the removal?

They should send you replacement smart cards - they wont read correct amounts, because they will assume the carts are full, but it will allow you to empty them out. What happens when they do empty? Will the printer stop or just keep on going without ink? Will it cause any damage to run the...

I have a client who would like his farm name placed on all his tractors but he wants it to match the existing graphics. I have looked thru all my fonts and can't find anything that matches this style. Any ideas? Thank you

My Royal Sovereign laminator came with a cover but my 3X more expensive Mutoh ValueJet did not. We just bought a twin size sheet to cover it with. Cut out and applied a Mutoh graphic to it so it looks professional....kind of.

I'm using a FC-7000 and have found that it is much more accurate when I turn off the paper weight. Seemed to be stretching the vinyl and throwing off the rej. a little. The manual says it works better with it but for me its better without.

I had the same problem with mine. When I plugged my wired mouse into another USB port to fininsh what I was working on I noticed that the wireless began working again. This happened a couple times so now I just leave the wired mouse plugged in but use the wireless....go figure.

Doesn't look like the pinch wheels are too tight to me, maybe too loose and letting the material move while plotting. Try loading the material back in and giving it a gentle tug. If you can move it by gently pulling I would try to tighten the wheels.

For now I guess I'll just group the print, group the cutlines, increase the size of the cut group by the needed .03, then center the cut and print. Not the way I think it should be done but I think it should work. If anyone comes up with the right way please let me know. Thanks for all the input.

Bob, I agree that usually being off .03 is no big deal except on these decals I have a .1 blue boarder around it so when I'm off .03 overall the left side decal has a boarder on one side of .07 and the other is now .13 I just looked for a registration sensing calibration setting in the...

It's .03in. 3/100ths.

I'm printing some oval decals using FlexiPro 8.1, Mutoh valuejet and contour cutting on my FC7000-130 and am having a bit of a problem. The the cut size should be 28" overall but is cutting about .03in. too small. I've read and tried most everything in the Graphtec manual and nothing seems to...