Search results

I1Profiler is used to create device profiles for printers, monitors, scanners, etc. When a RIP-based workflow is being used, the RIP is responsible for ink restrictions and linearization. Therefore, ink limiting/ restrictions are performed in the RIP rather than i1P.

Ink limit step is performed prior to the linearization as described above. There is a file to output and make ink restriction decisions from. The other issue that you are facing is that the SAI RIP must build/ process the ICC Profiles, and they cannot be directly imported from external color...

Caldera v13 - see screen grab

Your understanding is not wholly accurate. In addition to the internal procedure, several RIPs offer support for Latex 36x and 500 Series printer to directly address the on-board i1 spectrophotometer in the printer. This allows the software RIPs color engine to be used for profile creation...

Color management skills are learned, and are universal across printer brands, ink chemistry and RIPs. This program is a great place to gain a foundational understanding of the process: https://connect.idealliance.org/g7/education/colortrainingcmp The book referenced above (Real World Color...

Please post a clear photo of the nozzle test print...

The film Loading Accessory that comes with the 365 and 500 Series is intended for fabric and similar substrates that are not dimensionally stable while loading. The Media Saver is nylon fabric - here is a video illustrating it's use on a Latex 1500 Series:

The Media Saver Kit employs a series of powerful magnets on a series of flaps across it's 58 inch width. It is made of temperature resistant fabric. It is new to low-volume Latex, but has been included with 3.2 meter printers such as the Latex 1500 Series. As mentioned, fashioning a leader out...

See image attached for a description of the TUR options on the Latex 500 Series

Print side in = Less front tension Print side out = More front tension

For the record, the Trafficjet is manufactured by Mutoh, but is sold, supported, and brought to market as an Avery Dennison product. It has a specific inkset expressly for regulated traffic signage. The Trafficjet inkset is not available for use in any Mutoh-branded printer.

The leader can be affixed either before or after physically loading the media. It's user preference, and either one works.

In that picture, the leader is PVC banner,and the print media is self-adhesive vinyl, but could be almost any class of print media. Masking tape is resistant to the heat that the printer is capable of delivering (a maximum of 116c/ 241f). The take-up reel runs the same, with or without a...

HP makes a Media Saver kit for 60 inch medias for this purpose. Many users take small 2-5 foot long butt rolls of PVC banner media (13-18 oz) and affix to the front of the print media before loading into the printer. The leader is ideally the same width as the print media, as this makes loading...

This is a great point. Traffic and safety sheeting such as HIP and Diamond Grade reflective films are a very expensive and relatively rigid class of medias. Using a reusable leader when loading the printer with these films saves a significant amount of media, minimizes the potential for...

As I recall, bundling SAI with the 365 began around the first of the year (2019)

If the issue is that the cutter's mark sensor is not picking up the registration marks (dots), run a Media Calibration with the laminate applied. This is detailed in the Cutter User Manual beginning on page 17.

All HP Latex 300 Series printers ship with a RIP. 315, 335 and 365 models ship with perpetually licensed SAI Flexi Basic RIP 365 also includes a subscription to SAI Flexi Subscription pre-paid for 12-months Print & Cut Bundle Solutions ship with HP Flexi Print & Cut Software Details on these...

What SAV brand/ model number (name) do you use for this?