Search results

Try doing a head soak. I use the head height function to get the heads off the captops then fill the captops with isopropyl alcohol. Pinch the ink line to the pump.Press enter and when the head sits back on the captops turn the main power off. Give it an hour then release pinch from ink line and...

Hello Robert, My name is Ron, I am wondering if you may be able to help me. I have an SP540V and I need to replace both cable cards. I have been trying to find instructions or tutorials and there's nothing out there. If you have any info on how to do this would you mind sharing it with me? Any...

I need to do the same thing. Can you explain how you did this? Any help would be greatly appreciated.

Can you tell me if these are the fuses?

Can you tell me if these are the fuses for the print heads?

I did a nozzle test after my post and sure enough no black which is bizarre because I had done a nozzle test that morning and it was perfect. I looked to see if there was any ink pooling from possibly a broken damper but nothing. I then tried swapping the wires between k and c. I unplugged the...

Hi Lindsay, I have a SP540V that just started doing the same thing. If you have found the problem can you please let me know.

GMP Excelam 1400 I too am having problems with my laminator, I am having the same problem with my laminator. It has never worked right, every time I try laminating the lam starts to wrinkle right away, I have tried everything but nothing helps. The lam is good in the center of the roller but...

Help with Corel Can someone please post the exact same thing but for Corel Draw? I'm always having issues with cut lines. I'm using X6. I would greatly appreciate the help.

Same Problem (SP540V) I have the same problem but I am not able to adjust the margin. It's not highlighted therefor nothing happens when I try adjusting. What am I missing?

I may be able to help you out. Can you pm me?

Laminator I have the exact same Laminator and trying to find parts for for it. Do you know of anyone who supplies parts for these machines?

Can you email me your contact info and we'll go from there

What part of Canada are you from? I'm from Ontario and may be able to help

I use OEM inks. Going to try soaking the heads and check the dampers. Thanks. I really hope I don't have buy a new head. I'm not sure how expensive they are but I'm sure they cost a grand at least.

Would anyone have an idea what could be causing this to happen. When I print there is some banding in the black. I sent a pic to the service department where this printer was purchased and they said I need to replace the head. I'm hoping that's not the case. Any help with this would be greatly...

Hi all, I recently purchased a used excelam laminator. The model is a eco1400 cold/R. Does anyone know where I can get manuals for this thing and parts if needed? I sent 2 requests to the manufacturer and got no response. Any help with this would be greatly appreciated. Thanks

Hello all, I recently purchased a used excelam laminator. The model is an eco1400 cold/R. I am looking for manuals for this thing. I emailed the manufacturer twice and got no responce. Also does anyone know where I can get parts for this thing if I need any? Any help with this would be greatly...