Search results

Did some quick searching and also didn't turn up much vectorwise. If you are a member of the NPMA, I found they have a logo page, but you're most likely best off contacting each area and asking. I've had to contact people before for benefits and usually the companies/branches are fairly...

There's a few free clipart packs from: http://www.tshirtclipart.com Edit: Looks like the site requires registration but I believe the packs are still free. Something new since I was last there. I trust the guy who owns the site, his name's Tom/AdvancedArtist and posts tutorials and stuff on...

Are you sure the pump is working fine? I know the first model of the SP300's pump had some issues and would eventually fail, a tech came out and replaced mine about a year and a half ago and said it was a common issue with that model of pump and the new one is much more solid. The lines looked...

Welcome from Utah! I was born in Fort Wayne though for what it's worth!

I think all the text should be bleeding cowboy, and all the chapter headings in comic sans!

Oh good, I thought my hair was falling out because I was going bald, glad to know it's just the inks :)

Usually I let my monitor go into low power mode, but not my hard drives, had an issue where they wouldn't come back up after doing so on two separate occasions.

Hallo and welcome, from 120 desolate miles west of SLC!

The BIOS usually has an option to set the numlock state to on when the computer starts. I'd say check there first. Here's a page that covers how to do it via registry if it's not available in the BIOS: http://www.petri.co.il/change_numlock_default_state.htm

At first I was confused about why you bought the fuse holder, but having read the other thread I understand. Yes, you will need to desolder the old fuse and solder this one in its place. Make sure you're using a fairly low wattage iron (15'ish), otherwise you risk damaging/lifting the copper...

I agree with both of the above. As Dustin said, the fuse blew for a reason. A fuse is just a small piece of wire designed to burn whenever its rated load is exceeded to prevent damaging other harder to replace components (such as capacitors, resistors, IC's, etc). If you had a power spike or...

I've used Roland's SGP (Solvent Glossy Paper), as well as the "PrismJet Glossy Photo Paper" from Signwarehouse, which is actually made by Sihl, both work really well and give great results. I haven't used any of Intellicoat's materials for posters except their backlit SBL-7 media and it does...

Checked to make sure that VBA was installed and working within Corel? Could be that it's a student ver or something missing VBA.

Currently own a SP300, hopefully will get a 54" before the end of the yaer (was my next purchase after an engraver that I bought in March). Go big, the extra print time is saved trying to seam together a job and make it look professional.

Here's a few suggestions to try to troubleshoot it: First thing, eliminate the keyboard as a culprit, try another keyboard. If the keyboard does turn out to be the thing at fault, check the pins if it's a PS/2 and make sure that one isn't bent out of alignment (should see 6 straight pins and...

I tried to etch some words and some symbols for a tombstone once at my former employer. Was a pain in the arse to get on our Kern laser's bed and then it didn't really etch at all. Instead we ended up going the sandblast route, turned out very nice. Main problem was the laser wasn't doing...

And what software you're running and what RIP settings/etc. As well as any types of things you've done troubleshooting wise (head alignment, manual cleaning, etc).

Just launch wordpad and go to file open. However, what you're describing sounds like it's just bad media that's causing the hardware to lock while attempting to read it. He may also not be finalizing the session on his computer, or is using some ancient old cds. I know I still have some...

I would suggest copying the file off the cd first. If it gives CRC errors, then request it on a flash/thumb drive, e-mail, etc. If you're able to copy the CDR file off the cd and it is still unable to open, open the file in Wordpad. You should see the first few letters "RIFF", then you...

Another suggestion, try deleting the Parallel port in Windows, then readding it. In theory nothing driverwise should've changed, but who knows, we're clutching at straws here :)