Search results

You may still have issues with your system. Does your hardware check out? Are you using a local hard drive for your files or a Network drive. Make sure everything is stored locally on the RIP computer. Good Luck

You should be able to have Production Manager open as long as it's barcode server is not running. Turn it off in Flexi and give it a try. Good Luck

Yes. It should run both. You'll probably need to run upgrades after you install from the disk though. Depending on the version that came with your SP, it may not have drivers for the XC. Good Luck

Latex seems to show it up more prominently, but it also affects solvent prints. I've got no experience with it on a UV printer, but I suspect it may affect that ink as well.

That's pretty classic static electricity problem. You develop a charge as the vinyl peels off the roll and then you get another charge as the vinyl rolls under the pinch wheels. This can either attract or repel ink from where it's being directed from the jets. Also, different medias generate...

The T120 is a vinyl cutter. You'd need a router to do that. I'm betting someone on here knows of a vendor for those things or a merchant member on here that can make whatever you want, but it's not something I would recommend a plotter for. Good Luck

:) We all like happy endings :)

Andy, (with all due respect, because I like most of what you have to say) while it may work for you, once you change your ink limits, you've thrown out any calibration that has happened after that point, including linearization, and ICC profiles. So if ink density is your only consideration...

stlouis@nglantz.com nglantz.com 866-NGLANTZ (Grimco is a Gerber distributor, but NGlantz has been at it much longer - go with knowledge)

If it's a size that's not commonly used, it could be that it's sat at the distributor's warehouse for a few months, preceeded by sitting in the manufacturer's warehouse for a few months all before it gets to your place and sits for a few months. It all adds up. And if any of those locations...

Make sure that you're not using "Center on Vinyl" when doing any print and cut. That's a known issue that can cause print/cut registration issues.

Gold is generally made by printing yellow on top of silver metallic. Lucky is on the right track. Good luck

If you had a clear one before, it wasn't OEM. Roland wiper scrapers are black. It's likely that it's not installed correctly. When you install it, you should be able to push the bottom towards the back without any resistance and then it should be rigid when pushing the bottom towards the...

You can use different halftone settings. That looks like a large dot size. The Edge2 can go pretty fine. Try setting the halftone setting to a finer setting. The trade off is usually in gradients though. Larger dots give smoother transitions in larger printers and smaller dots will give...

Have you lubricated your rails lately? I had a customer use too much oil, which then dripped for quite some time and left white spots on the media. Do you have an air vent blowing on the printer? Another customer did and it was blowing dust onto the media on the way into the printer. It...

This was given to me probably around 25 years ago by my son who was probably 5th or 6th grade at the time. It came with 9 1$ bills inside the envelope. I haven't found anything to spend this on that would mean more to me than the gift itself. I keep it in my backpack and still take it on...

Start here: https://www.summa.eu/en-us Ask them for a vendor in your area. Good Luck

Turn off all the power and let it rest for 5 minutes. Turn on the main power in the rear, but not in front. Try connecting with Peck tool and see if you can download a report. If so, proceed with uploading parameters. If not, check network, IP settings etc. Make sure that you have Type3...