Search results

lol - I think I would prefer dopey

I use window juice - I think it works better than rapid tac on glass because it doesn't dry out as fast. I apply 99.9% of my vinyl dry - When I apply large format etched glass on conference room windows - I go wet because every flaw is seen and it needs to be perfect. I usually top hinge my...

An Oracal rep told me directly at the USSC show NOT TO USE 3M primer on their products because it will cause their adhesive to fail.

Even my Colorpainter 64s solvent would not print directly on mylar - needs to be done with a thermal printer like a summa dc4 or roland pc60

LOL - I like it JHill

I used the MPI2601 profile for the avery wall film

Click on Fill/Stroke Editor from the View Menu at the top of the screen. Highlight your text - uncheck the wireframe option

When I do 3-D graphics I use either 1/4 or 1/2 PVC - Run the pvc through the laminater with a vinyl for the surface color - then apply an rtape mask and then it hits the router. No touch up on the side because I use a black PVC to start - I use an 1/8" upcut spiral flute - Cuts nice and looks...

I can do full color mouse pads for you. PM me with your quantities and due dates.

I did a Hunter Douglas Sprinter Van - removed their vinyl overlay and replaced - The key is temp control for removal - It has to be cool to get the overlay off without removing the wrap underneath. GL

Ok - I had a colorpainter 64s - www.visualformix.com has plug and play refills - are 100% compatible - no need to flush lines or any other BS. Color gamuts were right on the money. $100.00 gets a liter bag w/ chip - you simply change out your old bag and cartridge out of your oem plastic...

Not a shirt i would wear - but I like the design

www.istockphoto.com - has just about anything you could ever want

Hey SignManiac - where did you source that devil? - he is cool - or should I say hot

Unfortunately this young man is suffering from Lou Gehrig's Disease. The CEO of this company met him and wanted to do something special for him. I assembled a PVC banner frame onsite and attached the banner. To suspend the banner - I fabricated a 4x4 3/4 plywood square and attached a 2 1/2"...

This is the largest banner that I have produced and installed to date. This was for a 1 day event. We produced, installed, and removed banner from site. Was a cool project. The banner frame was fabricated from 1" PVC. Used Solvex 13oz matte banner w/ 106 bungee balls.

This is a tough lesson that I have learned over time. The solution is - my time is worth money. The answer is customer expectation. When I get a new customer in - they receive a written quote stating the cost of the job. The 3 things we should all be getting paid for is - 1. materials - 2...

Oh yeah - cartidges are still available by roland or you can get refill kits from zero nine

The PC60 is ribbon based printer. It uses both wax and thermal ink cartridges. The cost to print is about 8 cents a square inch - $1.15 sq / ft. It will cut / print up to 24" widths. It is a good solution for printing spot whites and foil colors like gold and silver. IMO -Because the cost...

check out conde.com