Search results

Seems to be it. I found it here.

Had you tried soaking the printhead in a lint-free cloth that was doused in cleaning solution for a few hours? It may soften up anything that may have dried around or in the nozzles that appear clogged.

So...anyone know if Ghost reached out to DL, who seemed to had vectorized it and maybe worked out a deal of paying for the rendering???

Steel Magnolias https://www.whatfontis.com/NMY_Steel-Magnolias.font?text=Pine

Steel Magnolias https://www.whatfontis.com/NMY_Steel-Magnolias.font?text=Pine

Design-wise, there's enough on YouTube that they should become VERY comfortable after a few hours. Learning printing, well.... that's got to be in-house and overlooking someone else doing the printing. Understanding what profiles to use with what material or what job, how to color manage a job...

The woman used in the art was taken from an iPhone avatar. My installer uses one constantly. See attached.

I've always experienced that problem since printing long prints over 3' from back in 2003 with my first eco-solvent Roland! 8' banner would print 95.25". It's expected as per specs, so I'd compensate for it by making the print 97".

Monkey Buns Extra-expanded Italic https://creativemarket.com/128bittech/2921919-Comic-Fonts?u=whatfontis This, I could NOT find for free, unless I go deep into torrents and that's an IF.

Monkey Buns Extra-expanded Italic https://creativemarket.com/128bittech/2921919-Comic-Fonts?u=whatfontis This, I could NOT find for free, unless I go deep into torrents and that's an IF.

StillShineSans-Regular https://fontbundles.net/joelmaker/88394-still-shine-script?ref=hhktxI Found a free website, but thought better to post it.

Agreed. If going to an acrylic, do NOT use anything with low VOC. The low VOC paint has silicon in it and, in most cases, will not allow vinyl to stick. Test the paint on a small piece and apply vinyl after it's fully dry to see if it adheres. 3M makes a wall vinyl kit for things like this.

A&S Signwriter - stretched http://artandsignstudio.com/signwriter.html

Encoder strip and change profiles to see if any change.

Cutting strip installed correctly, having done it a half a dozen times over the 4 years I've had it. The blade was checked and no play is showing. Holder is secured snug as well. Just for S's & G's, I changed the blade twice when this occurred, which isn't cheap. Nothing. It's intermittent, so I...

The Valuecut 2 1800 I am using just had the strip replaced and a new blade put on. The cutter is hooked up via an ethernet connection and was perfectly fine, then started acting up, at first intermittingly with contour cuts, but then just cutting plain calendared vinyl started showing the same...

As I use up to 4 rolls of 3M IJ680CR 48"x50yd a month, I reached out to my rep for special pricing. There are still reps as mine left a few months ago and his area is being covered by two other people now.

If you put a CutContour line in your artwork and exported the art as a PDF, then it has the cutline in it. Change the color of the line when you create to Fuschia or Lime Green so you can see it if you open it in Adobe Illustrator. Make sure when you save in AI that you do as a High Quality...

SAi stopped fully supporting their software and rely on their forums to have users help each other. This has been going on for years. They don't even train people, but use third party businesses that are run by ex-employees for teaching end users how to use their software.

How long have you had this printer? Leave those settings as they are as it sounds like you have a printhead issue. Always check the physical prior to changing software settings. Also, have you ever taken any courses on using Flexi software?