Search results

I wanted to know if i have a Epson s40600 and i ordered a s40680 ink will it work still?

Have attached a video of what it Is doing. The yellow and light magenta not recognizing. I change 4 chips and still nothing. Any ideas?

When I send a print on the 26500 latex it print the image at the bottom twice. If attached picture. Using flexi 21 software. Any ideas? If I print the 3 color blocks after the print it don't double the print.

i am getting a 79:04 error on hp260. It will do a nozzle test but when go to print getting this error. I have in new printheads and ink. Any ideas?

how can i get my mimaki CG 130 SR3 to work with flexi 21? I download the driver but don't know which port to use to get it to cut.

hi where can i find parts like left side cover and the control panel for the MIMAKI CG 130SRIII plotter

I am getting a firmware error. Do anyone have firmware or a solution?

i have a 1324 printer and i am getting a cannot open port, i check the ip address but the ethernet is saying it isn't connected. i get the port check and the guy say it wasn't connected. he change it but i still not getting a coonection.

Hi I am trying to turn off the media initial so I wouldn't read the media. The paper slant also if possible. The printer is the rj 900c

do anyone have a icc profile for flexi sign for rj-900c? what program can be used ?

do anyone have a good icc profile for the mutoh rj900c/Pro printer for flexi sign? i put on the rj900x icc and it putting down alot of ink .

I had get a mainboard used but when i put it in, it giving me a cr encoder error when it start up. If i don't put down the lever it saying 79 err commu. error. Any help with this?

Hi I have a vj1204 when turn on when it try to initialize it move forward alittle and then get 68 error cr encoder. If I don't put down the rollers it would give me a 79 err commu. I took a main board from another vj1204 that had a problem error PF encoder as the original main board wouldn't...

I have a vj1204 and wanted to convert to a rj900, if the change the mainboard wouldn't it work? Has anyone try doing this?

i have a vj1204 but when i try to put on the firmware it saying it isn;t register to the printer. I try to change the serial and i can see it but when i send the firmware it still telling me it isn't register. Also i am getting a 79 err commu when i go in to change it.

I buy a vj628 from someone in my country, i am trying to set it up. i try to add it with valuejet finder but it is not picking up the ip address. I install the driver from signwarehouse so i can see it as a printer. i was told you had to download a program to monitor the printer as it doesn't...

I have a vinyl Express q130 cutter that stop connecting to the computer. I get the USB checked and it is good. The cutter do everything like test cut and move like normal but when I plug it in I am not hearing when it connect. Any help? Also anyone know how to connect with the RS -232c port?

I have a 1614 printer.. it was printing good but now the magenta and yellow stop printing.when I do a nozzle test. When I do a clean I can see magenta in the cap top so ink it coming through the print head but still no nozzle test. Any help? I think it could be dampers or print head?

Looking for parts for the q160 vinyl express plotter.. the belt that hold the head fuzz out..

Do anyone have icc profiles for vj1304 that get vibrant red and prints? I use mutoh all in one 720 x720 graphics 2 profile and this prints nice but the red isn't as rich .