• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1.

    Oce Arizona - White ink extreme dripping when printing floods

    We're having an issue with our 318GL. When printing any flood white (W|W|C, W|W|W, W, etc.) it will print fine for the first couple inches then the head will go out and start dumping streaks of thick white ink all over the print and bed. We've tried: Switching out the micron filter in the...
  3.

    DryTac SpotOn - HP 700W - Profile advice needed

    So, I think the biggest issue I've had with this printer is the lack of profiles. I have a large job to print on DryTac SpotOn Matte, but I'm having wrinkling issues while printing. I am currently using the DryTac SpotOn Clear profile, but when I started printing test pieces there is consistent...
  4.

    Need Help GBC Mounting Adhesive Bubbling

    Hello. I have a GBC Spire III 64T. I am trying to coat boards of 3/16" 'Ultra-Board' with 'Drytac M-Tac' white mounting adhesive. It's 51" roll adhesive and my boards are cut 48" wide. I am getting serious bubbling on the left and right sides, effectively ruining most of the board (middle 32"...
  5.

    Need Help White undercoat not lining up (Onyx Thrive 12 & Arizona 318GL)

    I'm having issues with the alignment of a white undercoat and color top coat. I regularly print on dark substrates. When I do, I make one file with a solid fill and use that as the spot color, then run a separate file with the color to print on top of the white. On fine detail prints (text...
  6.

    Need Help HP Latex 700W - HP Clear Film Ink Cracking

    I'm having an issue printing on HP Clear Film. I created a profile using the 'Generic Transparent Polyester Film'. I am trying to print an image with a white under-flood and as the print finishes the ink starts cracking. I have tried taking the curing temp + & - 20 degrees, I also tried dumping...
Top