Search results

Hi all you have to do is make sure that the last 3 digits of the read out is changed to 100 hope this helps people out, i thought they charge to much for this £160 + call out fee for a simple task thks

Hi heres a copy of a message from stillasdust how i added the same instructions to on his earlier thread

thats all you have to do then it comes up as 300v on lcd on printer, versaworks then sees it as a 300v, if you try to use colorrip again that will not print because its a 300v and colorip is for sp300. Both models use the same firmware [ im using 7.30 ] both have the same heads DX4 same capping...

Power off machine and unplug, remove back cover. on the left of the board is a row of dim switches. switch dim 7 to on [ second to the left is dim 7 ] replace cover. power up in service mode. in the service mode go to system switches. scroll to page 10. change the read out [ should look like...

Forgot to say no dongle needed at all on vesaworks 4.1 which is what im using, hope this helps

Hi to change from sp300 to sp300v, first switch dim switch 7 to on when machine is unplugged. then restart machine in service mode, go tosystem switch in the menu, scroll through to page 10 should say 10000000 change it to 10000100 press enter then restart machine and then in versaworks you...

Hi have a prob with my sp300 firmware 7.1 on colorip, was printing cyan now stopped, prints it on the test print but not on a rip any ideas, if i plug in my other 300 firmware 6.5 it prints it perfect, so not a computer issue, thks for any help .

Hi all, dont know if anyone can comfirm this i have 2 sp300 the first one i bought only runs colorip, was going to have board change to run vesaworks engineer wanted £160 to swap it out, but in the mean time i bought another sp300 which im going to fit new heads in, but this one runs vesaworks...

Hi all wonder if anyone can help , ive been using my Mimaki cg60 sr with Finecut in Corel, just seems alot of hard work compared to Flexisign how can i get it to work in Flexi drivers installed but doesnt show in flexi any ideals thks Martin

Hi all wonder if anyone can solve this problem i have with a mutoh xp-620c. when you start it up it moves the head back a few inches then the display comes up with [SYSTEM FAIL ORIGIN NOT FOUND] it doesnt have a holder in at the moment didnt want to buy one until im sure i can fix it any ideals...

Hi again solved the problem it was a loose ribbon cable to the control panel

Hi all have a prob with rock 38 powering up, when you plug it in all the led flash and then go of, if you switch it on and off by its switch nothing but if you unplug it from the mains it will then make the leds flash again, started to do this after the cog on the pump to capping station came...

Hi thks got it sorted now , flexi had put a tick in the fill box even on a fresh install on the other pc never happened before, must be something ive loaded in that has effected it thanks for help Martin

Hope someone knows the answer to this prob went to cut playboy bunny sticker for my daughter it cut it up like a bar code same with the writing this was from a vehicle outline prepared earlier, so vectorized a different buuny done the same, tried a scorpion ok type in writing ok [ using flexi...

Hi all got printer running sort of yellow streaky black zero, need UK supplier for new damoers & printheads, black damper split when flushing so going to replace all can anyone help thks again for help Martin

:clapping:Hi just to let you all know, fitted 2 amp quick blow fuse, with holders still got the old heads in didnt want to blow new ones printed, but no bk or yellow will check to see if fuses still ok and fit new heads and align them, old heads been sat in box for 1yr so probaly clogged up, had...

Hi had head fuses tested both blown F1/F2 need to find replacement ones in UK like Maplins anyone know the vaules or which fuse i can replace it with, hopefully will get it up and running thks for any help Martin

:brittain:Hi search forum found fuses on m/board got someone coming to test them today not going to short then across until i found what the prodlem is does anyone know the fuse vaules and which replacement fuse to use im in UK so should be able to get from Maplins hope somebody can help will...

:goodpost:Hi thks will try and locate them i prusume there on the head board, have sunked ink through the pipes ink flowing fine pumps out to waste tanks but no printing used half of the carts up trying will look into fuses now, if anyone know which componate it is will save me a bit of time...

:banghead: Hi wondered if anyone can help bought this machine, the bloke fitted new heads but never got it to print, the ink flows through when you do a fill and goes into the waste tank have checked the heads are set up right in the head rank menu al ok, have even installed the old heads which...