• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. onyx 19 help

    Yep, that's why USB ports are unreliable. Basically, you need a router with four LAN ports (+1 WAN). Plug you PC to LAN1, Go to router's management page, look at some info that says what IP address has been allocated to your PC. If your PC has something like: 192.168.1.5 then watch the video Go...
  2. onyx 19 help

    Whenever you re-install Onyx, after uninstalling the application go to its directories like program files and delete all files that have been left. p.s. WIN + R, type DEVMGMT.MSC, open it and see if there is everything okay.
  3. onyx 19 help

    If you've got a Windows Installer, boot with USB/DVD, format your C: drive and install a fresh OS. Then, install all drivers, upgrade Windows and only then install Onyx. I would recommend that you use Ethernet port. USB is unreliable. Tell us what issues do you have with Ethernet?
  4. Need Help Please help me evaluate the damages of this accident

    Open https://signs101.com/forums/mimaki.208/ Once you're there.... Click on POST NEW THREAD, or just click on the direct URL https://signs101.com/forums/mimaki.208/create-thread As for your other questions I'm from Ukraine. I know https://www.digiprint-supplies.com/en/contactus They sell...
  5. Need Help Please help me evaluate the damages of this accident

    Read this as well https://signs101.com/threads/mimaki-jv33-issue-please-help.114786/#post-1169885 There's a JV33 Electrical Troubleshooting https://www.manualslib.com/manual/1264353/Mimaki-Jv33-160.html?page=135
  6. Need Help Please help me evaluate the damages of this accident

    I suggest that you create a new thread with your particular case in Mimaki. It's hard to manage two separate problem in one thread. Read the message. I think it's your case. A printer wouldn't boot up as yours...
  7. Need Help Please help me evaluate the damages of this accident

    Once again. Buy a used print head for $50-100. You need a couple of nozzles in each channel. Companies that buy a new print head just through the old one to a bin. Why not helping you instead? Usually when one changes a print head it is also a good practice to change dampers and a cap top...
  8. Need Help Please help me evaluate the damages of this accident

    Well, obviously any case is different. However, when we had yellow leakage with our Roland RF-640 the tech came to us and he checked circuit/transistor. He had a multi-meter for the purpose. Once he checked transistors he came to the conclusion that it was a printhead. Anyway.... if one of your...
  9. Ink Coverage

    There are many unknown variables. The profile (i.e. ink limits)… ink coverage, size of the printed image, the amount of work. Our Onyx 19 is able to evaluate/predict the ink consumption in ml for each colour.
  10. Need Help Please help me evaluate the damages of this accident

    Yes. All dampers were original though not new. It happened in the middle of filling up inks.
  11. Need Help Please help me evaluate the damages of this accident

    We had the same issue, moreover it happened with yellow channel alike. In our case one damper was torn in the middle of cleaning process. We didn't notice the leakage and left the printer for about 15 minutes. You need to buy a new print head, head cables and dampers. I hope your fuses are ok
  12. Onyx and Summa barcodes

    Send your question to support@onyxgfx.com
  13. Need Help Roland SP540 not printing questions

    What do you mean - "it doesn't print"? if the device is printing once you sent a task though the inks don't come out of nozzles - it means, you've got a dead printhead.
  14. Need Help Making ICC Profile, grey's are green ??

    All your answers are there https://www.youtube.com/user/CHROMiXColorSmarts/videos This is the manual http://www.hutchcolor.com/PDF/Curve4Guide.pdf The only RIP supporting G7 calibration, from what I know, is Onyx 19.... It has the built-in feature.
  15. Cleaning during print cycle

    I guess you don't use IC CHIPS on your cartridges if it's third-party inks or your printer doesn't recognise those chips provided cartridges with inks are OEM. If it's the first case... Buy permanent chips on AliExpress. If it's the second update your printer firmware.
  16. Printer's drivers for Onyx 11

    There is a complete database for Onyx ProductionHouse 11.1.2 https://fex.net/uk/s/s4m8rts I don't have any other than those drivers...
  17. Is there a way to consolidate CutContour lines?

    Easy peasy....watch the video https://fex.net/uk/s/p8dkmxp In nutshell you have an element 100x100 mm, then we use step&repeat (in my case.... I allocate extra +1.5 mm to each sticker). Therefore we set 3 mm between each element. Grouping elements in rows and columns and we align them in the...
  18. Discussion COVID-19 save Your Printhead

    I do cleaning cycle each five days then I print CMYK steaks and only then I do custom cleaning with solvent and park my print head for the next 5 days. My captop is in excellent condition.
  19. Sending a print *then* cut job in onyx (with marks)

    Watch the video: https://fex.net/uk/s/6ofmf7m
  20. Onyx Thrive 19 and Roland

    Could you record your screen? Use an application like SnagIt to record the issue from scratch. Upload the video to YouTube and share it with us.
Top