Search results

Roland Inks, BN-20 and I have adjusted color management down from 100% on all but still coming out dark red. Picture attached

BN-20 printer, eps files done in adobe Illustrator or Photoshop and printed in versa works. Media Type Generic Vinyl 1 Color Management ive tried most of the presets and im not sure how to make profile and where to load it in at. Can anyone help with that?

How can I print bright reds in versaworks? Seems every preset prints way off colors BN-20 printer, eps files done in adobe Illustrator or Photoshop and printed in versa works. Media Type Generic Vinyl 1 Color Management ive tried most of the presets and im not sure how to make profile and where...

Oh my god thank you so much. For some reason when I adjust in the other cut adjustment it changed them in both so I assumed it was doing them both. I got it working. You are the first in 3 posts to nail it. Thank you Thank you Thank you. This has been so frustrating

Hi everyone, So I have so much time into this with no luck fixing. Has new cut mark sensor and I try and adjust print and cut in bn-20 utility but it is doing nothing to move the cut in versaworks. It just keeps cutting in same spot over and over. Here are examples of my last two attempts at...

IT does just fine at it once you can figure it out. I got it done now. Thanks everyone

Im attempting both and neither is consistent. I try cutting through just vinyl at 95 force and one time it cuts through fine and the next it cuts through the backer on certain sides. Then I try cutting through backer a different try on new vinyl sheet and it cuts through on two of the four sides

When trying to cut through the backing its cutting through 2 of the 4 sides.

OK new blade, new strip it worked the first time and when I do the same settings again it doesnt cut through backing in some areas. Any other thoughts? This time it is an easy rectangle cut and im noticing its not cutting through consistently on the left and back of the sticker but is cutting...

See Below

I will give it a shot and let you know.

It has a little bit of wear I will change it but would that effect ones im not cutting through the backing as well? Also it cuts through one and the one following behind it in same cutting spot it doesnt so im not sure it will be strip would it? Also changing from 60 degree blade to 45

Recently bought a new bn-20. Having heck of a time with cut consistency. cutting through 2.75mil 3651ra plus 2.5mil Oraguard 210 laminate. Seems sometimes it will cut through laminate and vinyl but next time it doesnt same 85-95 force using versaworks. Also when i try to diecut im finding it...

New to this machine and having a heck of a time with things. Yes some because im new all together except vinyl cutting. Anyways im getting inconsistent contour cuts 2 images on cut job 60 degree blade offset .50 and force 75 trying to get it to cut through vinyl with laminate. test cut seems...

Thanks I was considering that its much easier but the look of a die cut on some is what some customers expect so id like to be able to offer it. I laminate for a few reasons. 1 most of what im doing right now goes on off road vehicles that get dirty then vehicles are cleaned so stickers are...

Tha I tried the 60 degree, it still cut some areas and not through all. I notice when its cutting its going really fast as well. If I try a double kiss cutcontour to cut out what should i start the cut settings at? Thanks everyone really appreciate the help. Nothing like burning material and...

It is the BN-20 Roland 45 in it but I have some 60 degree I could put in it if that will be better

Yes I have both a perfcut and cut contour. I tried without the cut boundaries on and it came out cleaner but still not cutting all the way through on a different design with more detailed turns and cuts. It seems when it gets in the cuts with turns its not getting through all the way or enough...

Here is what I have set. Should I turn off cut image boundaries maybe? I checked the blade and it was out farther then needed as well so I put adjusted that but I do not think that was the problem

Im trying to perf cut through decals and they are not coming out right. See picture. Anyone know what i am doing wrong? Trying to get clean cuts all the way through so i can attempt die cut on different shape stickers. Settings I was told to use by rep and im thinking they are wrong perforation...