Search results

Thanks for the response. Elite does not do lit letters, but I will look into letterfab. I really appreciate this group.

Can anyone recommend a good trade source for dimensional cut acrylic and metal sing letters with LED backlighting and halo lit? This falls a little bit out of my wheelhouse, but it is for a big client of mine.

Anybody ever try one of these steamers on old graphics applied to stainless steel elevator doors? I am in the middle of my second recent removal and these are awful beasts.

Thanks for the response JimmyG. Sounds like a good plan.

Hello, I am looking for a trade supplier for a 8'x4' double-sided HDU sign, will be routed and painted. Also looking for a recommendation on how best to support the sign between two stone pedestals.

I use SignWorld America, and I know I have bought hardware that is designed to install into the wall rather than hang on a pole. You might also check signbracketstore.com for more decorative and historic looking options.

Hi Bill, I have not seen that type of system. I actually have a flyer laying next to me for www.abacatalog.com that shows a triangular pad that 'resembles' your piece. I am not familiar with aba, I just have this flyer. We have done these a-frames in the past just cutting a single piece of...

Magnets are necessary for this piece. They are .030 and I will need three different ones for this job, but it is also a job that will repeat.

Can anyone recommend a good trade source for some oversize magnets? They are going to be about 9'x 11' so will have to be tiled and contour cut.

I ordered cut acrylic letters with posts for mounting in a brick wall. There are A LOT of letters, many of which are small, and the client has decided they don't want that many holes drilled into the wall. So now I will need to mount the letters in a runner of some kind, and mount that to the...

Thanks for the responses. These will work out great.

The 3M IJ8624 is the way to go, but it is not as simple as laying vinyl. It does have to be heated, but you also have to use a roller to press it into the low spots as you heat it. And you will feel like you were hit by a truck at the end of the install if you have much surface area to cover...

I am looking for a source for cut acrylic and pvc letters, icons and logos. Can anyone recommend a wholesale partner?