Search results

I believe I have this done already. Either way our IT guy is coming in tomorrow to see what he can do until we get the new computer/VW6. I even tried creating a rule that allowed the two IP addresses to communicate together... Thank you for the input!

That's what I was thinking myself. The computer used for the digital printer runs on Windows Vista, I am unable to install any updates and our IT guy was unable to access the computer remotely. Now, I am wondering if: We replace the computer and upgrade to Windows 10 or 11, can I download the...

Versaworks is failing to stay connected with my Roland LEC-330. I have done the following: -Unplugged/Plugged in Ethernet -Restart Versaworks/Computer/Printer -Double checked IP's, Subnet, and Gateway -IvP4 enabled, DHCP enabled -Initialized Versaworks and reestablished printer. In the command...

All of my alignment tests look great. However, my black print head appears to be off? I talked to a print tech, he suggested that the black print head may need to be physically adjusted. When I do my alignment test, everything is registered to the black.. Yet, when I print the black is...

Thank you for all the suggestions, they have been very helpful. Switching the gray to an RGB seemed to smooth it to an acceptable level. Just need to color match a bit. I tried adjusting the Bidirectional settings in both user mode and Service mode. With the new settings (lined up) the black...

Ripping it in Roland Versaworks.

I am running a bi-directional test then going to adjust. I had it dialed in to created awesome prints just a week ago until I had an issue with yellow starvation, spent the past two days learning how to fix that. Now I have this textured/modeling issue and my yellow saturation is way too high...

I had the same thought, being that the ink needed to flow more. However this is a UV ink, I don't know if there is much leeway in adjusting the curing process.

How can I get this Gray to print smooth? I am printing bi-directional at High-Quality. Using Corel Draw - Roland Versaworks - Roland LEC-330. Thank you

I changed both of the yellow dampers, now I am not getting any Yellow to print.... after a bit more research, I found that I need to prime the damper using a syringe, (the youtube video I found didn't mention this). Hopefully this solves the issue. I pinched of one of the dampers (they both...

It is a Roland LEC-330

I ran a head wash with cleaning solution the other day, the yellow was not printing and appeared to have a back flow of black ink in it. After running a Power Clean the issue was resolved. Now the saturation of the yellow will randomly just go away, but then sometimes return towards the end of...

I have gotten into the Service Menu -> Bi-directional Default -> Test Print -> 123456 ->Enter , When I run the test it does the test on Low Height, then I adjust to High Height, the test is similar to the User bidirectional test, but instead of the sections being labeled as No.1 No.2 ect. It...

Hey there, I am relatively new to digital printing, I have a background in production printing i.e. Screen, Litho, and Flexo, with some experience using digital printing. All of our digital printing is done using a Roland Lec-330 printer. The first attached image shows the white around the...