blurry

Hi all, we have purchased a new 630 about 4 weeks ago. Straight from the get go it prints blurry edges vertically. The installer recommended several manual head alignments will eventually fine tune it to be perfect. I have done endless head alignments, upped the optimiser, tried all types of...

After replacing my printer head, the prints are not sharp anymore. It looks as if air is blown into the ink and makes spray and travel around the print area. I put back the old head and saw the same issue. So bad head is ruled out. The nuzzle check prints fine or the problem is not visible since...

Good afternoon everyone. Just starting this morning, I've been having issues printing on my XC-540 Soljet printer. It was working fine before the weekend, but after running a job through, the print comes out misaligned and blurry. After trying a few calibration fixes, I cleaned the encoding...

Hello, We are having a specific printing issue. All colors are printing sharp except black and yellow when they are together - like a warning decal etc. Black is fine and sharp with other colors or by itself. Yellow is also fine and sharp with other colors or by itself - but when they are...

Hello, I have a Mutoh ValueJet 1204. When ever I print, it prints perfect until about 6-8 inches into graphic. Then it looks all blurry for an inch then goes back to printing clear. This will repeat over and over on a continued image. I have changed print profiles and receive the same results...

Hi everyone I have bought a WPR330 from a chinese UV printing company. I never thought about having this kind of stuff but printing on various items is kind of interesting so I wanted to try the product at the lowest price possible just to see the results. The printer is based on an Epson R330...

Please help! I am using a Epson 1430 Sublimation printer to print cell phone cases. I had a continuous ink system that was printing fine until the colors were off and notice some of the plungers fell out so I bought a new continuous sublimation ink system, this time from Ink Products for Heat...

I have had problems with my CJV30 for a while and couldn't resolve the problem so we recently purchased and installed a new printhead but the print is very blurry. It's worst printing bi-directional in fast print mode, best unidirectional and fast print unchecked. Any ideas as to what may be...

Happy Tuesday all, This one is new. Yesterday afternoon, mid-print the magenta ink all of a sudden started printing extremely blurry. I've attached a picture of that, with the latest test draw http://postimg.org/image/bzl2j7q91/ Has anyone seen this happen before? I can confirm there was...