driver

Hello guys! Bill here from Greece.. 2 days ago i got a mimaki cg61 cutting plotter <<Dinosaur>> . unfortunately the working pc has been toss to garbage by the wife of the owner who died . i have the plotter and its cables plus a CADlink adapter on the serial port side (to pc ) , i went at a...

A few different people in my office are having this problem. When I send a job to our Canon IPF8300S, the job cancels as soon as it hits the printer. I've tried removing and reinstalling the drivers, but no luck.

Hi I am new to the forum, so thanks in advance. I Thrive 12.2 and need the prnInst file for a 560. I have a couple copies of Onyx and downloaded the driver when I installed the printer originally but didn't keep a copy. (Won't ever do that again) I already reinstalled Thrive and my other...

I have been using the Graphtec CE2000-60 for years and it works great, but the computer and harddrive died. I was using Cibercut. I have long lost any support discs and files for this program, so I need new stuff. It haven't had much luck finding a driver. I do have several older computers that...

I just published a blog post on our website about how Windows 7 End of Support will affect older Flora printer models. Anyone who has a Flora printer with the Konica Minolta 512 or 1024 fixed dot print heads should read the post before upgrading to Windows 10...

Hello, I am new here and I need some help about this cutting plotter. I bought a ColorCamm PNC-5000 few month ago because it was quite cheap, but there was not the CD-Rom with it, so, I was wondering if somebody can help me with the drivers and the software. I made many research but almost every...

Hello friends I have a small inconvenience, stolen my pc where I had the drivers and software of my printer Dazzle Jet 3208km luckily I have a Maintop 5.3 Original with key, the problem is that now the new pc asks me for the printer control or a Driver Maintop Usb System Control and I do not...

I recently had my old computer running windows 8 crash on me. I had a to do a complete restore. Now I can't get the downloaded Graphtec plotter controller to communicate. I get this error message. --------------------------- Graphtec Cutting Plotter Controller ---------------------------...

Hello I'm newbie here, I have a simple question. My cutter plotter have a two alternative port connection, usb-b and rs232 serial. Unfortunately usb-b port has damaged. So I would like to buy a rs232 cable to use it. Does it require a new driver for rs232 or just use already driver I have...

OK, I'm a bit confused. Wrapped my cars driver side (2015 Ford Flex). Took the driver side door handles off. No problem, wrap went on without a problem. Now onto the passenger side. Went to take the door handles off....no-go. WTH??? Loosen up the screw, pull on the door handle. Nothing! Driver...

Have a vinyl cutter but no distinctive markings in it. When I turn it on it comes up with sign wizard 2005. I have a serial to USB for it. I need to find a driver and a program for cutting. Any info or assistance is appreciated

We recently bought a Designjet 5000ps from a company going out of business for a great price, but it didn't come with any cd's and when I download the driver from Hp's website, it is a self expanding zip file and when it expands, there is no setup or .exe file inside. When I read the "read me"...

Hey guys... New to the threads here. Maybe someone can help me out. I had an HP9000S years ago and ran it with wasatch 5.3. Everything ran fine for years. We just bought a different used HP9000S and the same wasatch rip does not recognize the new(used) printer. The wasatch rip says the...

Just purchased a used Mimaki JV3 160s. I bought the printer complete with the rip computer (with Firewire card installed) which was unplugged the same way I plugged it back in after the move. All systems were go right before we unplugged it to ship and plugged back in before booting anything...

Hi Everyone, I'm looking for a bit of advice/info. I have an old Junior plus that I would like to get up and running. The problem is I dont have the drivers and I cant seem to find them anywhere. I have tried contacting Mutoh but have had no reply. I bought a Prolific USB to Serial, It seem...

I ask? This component is damaged on the driver head. What error would present the printer? Mutoh Rockhooper II Element: Offsite pics replaced. Please read our rules and instructions on photo posting.

Hello all, I have an Agfa Sherpa 43i hooked up and working... at least it cleaned itself and printed a test page. It has a network connection and is accessible through the static IP address I assigned it. That's a good sign. I also hooked a PC to the parallel port and it recognized it as a...