• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

printer head problems

  1.

    Blurry, Grainy print quality -- Zhongye E1800

    Hello all, I am in a situation with my printer. The quality in my printer has degraded badly. I can no longer print images no matter the resolution at a clear quality. It seems that over the hot weekend something affected it. My prints come out grainy and blurry, with what appears to be tiny...
    • STVOHH
    • Thread
    • blurry print dx5 epson printhead poor image quality printer advice printer head problems zhongye
    • Replies: 6
    • Forum: Miscellaneous Printers

  2. JV33-130 not printing one channel

    Hello everyone, We purchased a new JV33-130 printer three years ago and had been using without it any issues, a year ago the head was replaced due to substantial damaged caused by one of the metal substrate holders. Recently, after doing a test draw, I noticed one of the channels was not...

  3. Rockhopper III E118 Head Overheat 3

    Hello, After trying to change a head in my Rockhopper I have the following error: E118 Head Overheat 3. I checked the error codes and saw that it has to do with the head cable. I changed the cable with a new one but again the same error. Any advice on this one???

  4. Mutoh vj-1204AS printer head wrong

    So I recently purchased this vinyl printer along with a vinyl plotter to get into the graphics industry. Its more of just a hobby so I havnt been in a rush to fix this issue. So previous owner replaced the printer head but replaced it with the wrong style. for the majority of the printer...

  5. XF 640 printer head installation problems

    Greetings! We have a Roland XF 640 and recently needed to replace one of the two heads. We did this ourselves... Installed new dampers, installed a new pump. There are no leaks, no ink dripping anywhere. Yet the ink does not seem to be pulling through the printer head. When I do a test print...
  6.

    Printing issues on hp design jet L25500

    Hi my printer is have an issues with color. we are getting a light yellow hue around the the colors (see attached pic) if some one could point me in the the right direction on what maybe causing this, or a solution that would be great thanks in advance Mike.
  7.

    HELP! Mimaki JV33-160 leaking ink

    Yellow ink is flowing freely from our JV33-160 . Yellow is bleeding into all other colors. You can see droplets forming on the bottom of the printer head. We are printing on canvas. I have attached a photo. Any help would be greatly appreciated. We are a small business and this is our...

  8. Want to Buy: Mutoh VJ 1304 Service/Repair Manual

    I want to buy a copy of a Mutoh ValueJet 1304 repair manual. Private message me if you have one. THANK YOU!
  9.

    Possible heads stuck open on Mutoh Falcon Outdoor

    I'm not sure whats going on here, but it appears as if the heads are stuck open. When I try to print an image I get a super dark black band that prints past the edge of the banner material. Also if I do a test print I get a blue and black band that extends all the way instead of the individual...
Top