tried

Hi Everyone, I had a complete hard drive fail and updated to a new machine. Long story short and lots of reading on here to have my printer back on the network. I have more issues now, and have tried so many avenues but no luck. I'm running Flexi 12 and my printer is a HP 26500. I've downloaded...

I am in search of some good engine turn (Large) gold graphics. I tried aurora graphics but I can only find small there. Any other ideas?

Hi peoples. I used to print transfers on Siser material with HP Photorealistic-LowTemperature Substrate setting on my old HP L25500. Now, on the 330 it seams that that preset/profile is gone. I was wandering what everyone else is using for transfer print. I tried Generic paper and lowered the...

Does anyone know of a tare proof paper? I need to print on Rolls 36" or 54" for our Mutoh printer Eco Sol Inks. Tried Arlon DPF 208 didn't work out for us, 26 Bad rolls.:banghead:

Does anyone know what this problem might be, I'm refilling my JV3 with ink and only my cyan, lt cyan and yellow is coming out on the test print. I tried drawing ink from the back of the printer and from the damper still can't get it to fill the dampers, even on new dampers.

I've tried to upgrade to 12.1 and now all these issues have popped up. Tried to upgrade to 12.1 (i am an advantage holder) and it wouldn't update my key. but 12.1 is installed. But cannot open anything as there's no programs to open. Ok install 12.0.5 back on it. everything is good, except...

Not sure where to go with this and Grimco is a bit slow responding. This pic is on Avery 1005 but it happens on all vinyl medias. (Only really see it on dark heavy coverage though) We have: Replaced all printheads Increased vacume in profile Increased heat Tried other profiles Printhead...

I have a JF 1631 flatbed and I printed a table and then went to print another table and the origin shifted back on me about a 1/4 inch. I have shut it down and restarted a few time, slid the gantry to different positions, unplugged the machine for a bit and every time I try to set the origin...

I'm in need of help to get back printing. I tried searching the forums to no avail. Here's the situation. My RIP computer may be shot.(it's out for repair, maybe) Good news is I have a brand new replacement with Win 7 Pro. So I figure I'll go to the Roland site and download VW, but I need...

hello, i have a print job that is about 11.7" tall but it still tries to break up when I print. I even tried a small square and it seems to enlarge everything... please help .

Everything was working fine all day. I came back this afternoon and tried to print a file. When I send from Flexi to PM it holds like its supposed to, its shows "rip" and "print" when I select Rip it moves the file up to ready but then the "print" isn't available to select. I have also tried...

I am not even sure how to describe what is going on. I am attaching pictures to show you what the vinyl should look like (Software screen shot) and what the vinyl cutter actually cut. So here is what I have tried so far to fix this: Called and worked with tech support from US cutter for an...

Artist Creates INVISIBLE ‘Art’ and Collectors are Paying Millions | artFido's Blog Millions of dollars?? Funny how she says she tried all other types of art and no dealers were interested in any of it.

I am trying to cut some 15" wide vinyl that's about 10' long and can see the vinyl moves to my right as it feeds out and it moves to my left as it feeds back in. I have tried keeping slack on the viny as it feeds and have tried letting it pull from the roll as it feeds with the same result. i...

Tried a few sites , no luck.

Hello all, I have encountered a problem with my plotter. It seems the plotter paper i am using is stretching. If I plot a 24" x 96" box it comes out at 24"x 96.25" on paper. But if i cut the same box out of vinyl it comes out the correct size. Has anyone ever experienced this? I plot a lot...

So we've undertaken a project for the local Dairy Queen where they want to print the logo LARGE for the side of a crew cab F250. The truck is metallic dark gray, and they want the colors to be pretty muted, and show the metallic gray through the color...kind of a faded effect. We have tried...

I used barcode for years with my s2 140t cutter and now i traded s2 to F. I bought summa F support to onyx, it prints (hp 360) barcodes just like before but i'm stuggling with the rest :D I got used to barcodes so i'm not going back to stoneage again.. I tried to read the manual, is it possible...