-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
A small printer?
- Thread starter gtcway
- Start date
Flame
New Member
Signwarehouse has some small Mutoh's (ahem... prismjet's) that are pretty affordable. It all depends on what you call affordable though. Just keep in mind they are always going to cost more than a plotter, and a plotter can cost you $4,000 - $6,000 easily. So I would say if you want a good printer that won't cost you and arm and a leg to operate, it's still going to be atleast $8,000-$9,000. Minimum.
Not every sign guy can afford a printer. I couldn't but I bought one anyway. lol. Now that I have one it's a whole different story. You can just sit in front of it and watch the money roll out of it...
Not every sign guy can afford a printer. I couldn't but I bought one anyway. lol. Now that I have one it's a whole different story. You can just sit in front of it and watch the money roll out of it...
Gino
Premium Subscriber
Before you blow a few thousand on a small printer/cutter, think about what/who you want to target. If small decals are all you want, than just about anything will suffice. If you look at the possibilities down the road, after locals know you have this new capability and your quality is good, you’ll be asked to do things that your ‘small, cheap printer’ won’t be able to handle. Most people that I’ve talked to or saw written on other posts, are all selling their small printers and upgrading to fulfill their almost overnight requests of bigger projects. Sub them out for a little while and see what area your needs really are. Instead of spending a few thousand, needlessly [and not getting back what you paid for it], put it into the machine that suits your studied needs. No need to get a 54", 60" or 72", but at least look into 30" machines. Heck I see them going for $7,000.00 now and only a year old.
Like FlameMaster said...
Like FlameMaster said...
Not every sign guy can afford a printer. I couldn't but I bought one anyway. lol. Now that I have one it's a whole different story. You can just sit in front of it and watch the money roll out of it...[/quote said:Your workload will increase as you can meet all of your customers orders.
Good Luck.
2NinerNiner2
New Member
A used Gerber Edge system would be a good way to get into the 'print' end of things. Great at what they do 
Flame
New Member
FlameMaster isn't that called counterfitting &will get you 20+years in the big house :Big Laugh[/quote]Cadmn said:
LOL. Yeah, but are you gonna tell them?
hehehe.
JK. You know what I mean. The thing is a money maker, just not literally (I don't think I could get the same quality).
Flame
New Member
Not if you share LOL wife went to one of those check cashing places last night & woman was in there trying to cash counterfit money orders.Interesting[/quote]Cadmn said:LOL. Yeah, but are you gonna tell them?
Man, I could make so many things with the equipment I've got. I mean, you could get away with a lot! I have morals though and will never make anything illegal. Just for kicks though I've tried making a: snowboarding season pass, fake drivers license, tabs for my license plate and a parking permit for a local high school. Laughed at it and got rid of it.
I have actually had "customers" come in and ask for stuff like that. All of the above mentioned products have been things these people have asked me to make. I scan their stuff in, tell them the material has a anti-scan coating (not really though) and remind them they will probably go to jail for this and I won't be of any part of it. I considered making this one kid a season pass for a ski resort that he wanted, but purposely make it a fake. Small enough that the kid wouldn't notice, but enough to get him BUSTED first time he tried to use it. Then thought better of it and just told him no.
Anyone else have someone ask for something like this?
Rat_Fink
New Member
I have an unopened Encad NovaJet 750 for sale:
http://signs101.com/forums/showthread.php?p=71653#post71653
Great Indoor printer that will give you limited outdoor use as well.
Thanks
Mike
http://signs101.com/forums/showthread.php?p=71653#post71653
Great Indoor printer that will give you limited outdoor use as well.
Thanks
Mike
Blazingsun
New Member
signmeup
New Member
They are but you might still be able to get one through their exchange/repair program. You buy a junker off ebay then send it to ALPS for "repair". They send you a brand new printer.(For a fee of course). I have 2 and I use them to make decals for model planes that I sell. I've made a lot of money with my ALPS. I print on clear 2 mil vinyl (KPMF)then laminate it with same. They do about 8.5" wide by about 14" long but that's fine for a lot of decal work. They print foils and white too.Ogriv said:
Adrian
Blazingsun
New Member
TresL said:
Im Using roll media, I bought Perma jet 4 mil vinyl and Inteli coat Magic 2 mil Cast gloss Lamnate from Fellers, I trimed the 36" wide roll down to 13" wide.
The r1800 has a roll option that allowes you to print 13"x44" it has been working pretty good for small short run decals.
I know Beacon Graphics has some IJ DuraGraphix DG Adhesive Backed Value Vinyl, 3.5 mil haven't tried it yet.