• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Any tips for reaching hard places like over-the-cab?

JoeRees

New Member
Does everyone struggle with this scenario as much as I do? You know the type of job - trying to apply graphics over the windshield on a box truck or van can really test my flexibility and balance. I've tried a number of ladder and plank arrangements and always feel like I am working way too hard for what should be a simple task. At 71 years old I just don't have the stretch or strength to get away with the sketchy stuff I could manage in younger days. If this has been discussed previously I couldn't find it - what's the latest and greatest recommendations? Thanks...
 

ringocat22

New Member
Replying so I can get tips as well. I hate doing over the cab graphics. The way we do it is me on one ladder, husband on the other, half standing on the ladder and half standing on the window of the vehicle, but I hate that method. It always feels unsafe with the ladder feeling like it's going to kick out from under me. I've looked into scaffolding, but the cross brace would prevent getting very close. In a perfect world I'd build a place with a low walkway that the truck could pull up to, but until I can build a building that's not an option.

We charge a premium for over the cab graphics just because they're such a PITA.
 

Stacey K

I like making signs
Replying so I can get tips as well. I hate doing over the cab graphics. The way we do it is me on one ladder, husband on the other, half standing on the ladder and half standing on the window of the vehicle, but I hate that method. It always feels unsafe with the ladder feeling like it's going to kick out from under me. I've looked into scaffolding, but the cross brace would prevent getting very close. In a perfect world I'd build a place with a low walkway that the truck could pull up to, but until I can build a building that's not an option.

We charge a premium for over the cab graphics just because they're such a PITA.
Ugh...this is what I do also, hang on a ladder with a leg on the windshield. Sketchy. Hopefully someone smarter than the three of us responds...lol
 

JoeRees

New Member
This type of job - exponentially harder when there's multiple colors and you're dry-applying.
 

Attachments

  • 54809558198_64df9d6c57_c.jpg
    54809558198_64df9d6c57_c.jpg
    171.2 KB · Views: 17
  • 54808481682_67a73caa89_c.jpg
    54808481682_67a73caa89_c.jpg
    156.1 KB · Views: 12
  • Agree
Reactions: 1 user

Graphic Extremes

Knows To Little
I bought inexpensive scaffolding and use a couple of two by twelves, I have them 5 wide so I have room to kneel or lay down. Drive truck under the boards and apply the vinyl.. Works like a charm.
 

MikePro

Active Member
i use a plank between two ladders. I have little giants, but homedepot carries a less expensive gorilla-brand
66644044.jpeg
 

JoeRees

New Member
"I bought inexpensive scaffolding..." I believe something like that is the right concept. However, when I tried a version of that it was a huge disappointment. The articulating ladder shown below proved to be extremely awkward in practice for anything. Even as a simple folding ladder it was never the right height, was WAY too hard to open and close in tight quarters, and the legs were too narrow to provide much stability. As a platform it had the same problems, plus making me extremely nervous that the whole shebang might collapse any moment as I crawled toward the unsupported center. It did not collapse but I'm not desperate enough to try it twice. If the upright parts of the legs were adjustable and the center hinge was stronger it might have been an elegant solution, but this was a fail for me.

I forgot to mention that, at the time I tried this folding mess, a huge criteria for me was portability, and it still is, as I mostly work on-site from a minivan. Scaffolding and a plank take up a lot of room. I think Little Giant needs to get on this problem and come up with a truly elegant solution that solves all the problems mentioned above. Anybody else have tricks or rigs that make this easier to reach?
 

Attachments

  • ladder.jpg
    ladder.jpg
    184.4 KB · Views: 6

JoeRees

New Member
MikePro - I LIKE THAT! I happen to have a Gorilla ladder from Home Depot that is too short once you split the legs to make twin A-frames like that. I also have a Little Giant expanding plank but it is way too heavy and bulky to drag around in a minivan. If I had a taller ladder and a shorter plank like the one you showed that just might fill the bill. Thank you for the idea!
 
  • Agree
Reactions: 1 user

unclebun

Active Member
I hired an employee who was small and weighed only 115 lbs. The could go on the roof and do jobs like that without damaging the roof. Unfortunately he got older and grew and is now 165 lbs.
 
Top