Auto Service Labels, what material

[chapmachau]

Looking to print labels with roland eco Sol printer. The material can be written on to give the date of last service/inspection. Its pretty thick so the indent of the pen is left behind permanently. Have attached a photo.
Would really appreciate any help with the name of the material.

 

[shoresigns]

All I can tell you from that photo is it's probably vinyl, and it isn't laminated.

 

[ChicagoGraphics]

Static cling

 

[chapmachau]

Appreciate the information. Sorry I forgot to say these are going on the mast of a forklift truck. The material seemed thicker than the usual.

 

[James Burke]

The ones I've seen are PSA heavy aluminum foil.

Follow this link to see if this might work, or perhaps they can point you in the right direction:

http://www.allfoils.com/products/pressure-sensitive-adhesives/


JB

 

[equippaint]

Its aluminum not vinyl. Id think youd be better off to sub out to a company that does these or passing. I dont know for sure but Id bet the process to produce these efficiently falls outside the scope and capability of a regular sign shops equipment.

 

[rjssigns]

Its aluminum not vinyl. Id think youd be better off to sub out to a company that does these or passing. I dont know for sure but Id bet the process to produce these efficiently falls outside the scope and capability of a regular sign shops equipment.

This^^^^
I used to work in a factory and used this type of aluminum label for machine identification. Adhesive was once and done. If you got it crooked removing it resulted in destroying the label.

 

[SkyHighSigns]

Aluminum coated vinyl or a silver vinyl. Kind of like led tape (soft material)

 

[bannertime]

Oh man. I wonder if you could use Alumigraphics Silver for this??

 

[White Haus]

The material in your example is probably something like this https://www.3mcanada.ca/3M/en_CA/co...-case/?N=5002385+3293799021+3294529206&rt=rud

Can be screen printed or UV printed, but won't play well with your Solvent printer.

 

[Trex604]

Looking to print labels with roland eco Sol printer. The material can be written on to give the date of last service/inspection. Its pretty thick so the indent of the pen is left behind permanently. Have attached a photo.
Would really appreciate any help with the name of the material.

Did you ever find a material to do this with your solvent printer? I am looking to do the exact same thing

 

[Sindex Printing]

This is what I would look at using
https://www.3m.com/3M/en_US/company...-Label-Materials/?N=5002385+3291133896&rt=rud