justjust89
New Member
Hi guys
I tried searching the forum but I am unsure if I may have overlooked a post that already covers this subject.
Recently acquired a Mimaki UCJV300 and really would be grateful if anyone could point me in the right direction or share their expert knowledge, please.
When the machine was installed the only profiles that were setup without my knowledge were a few different profiles for RITRAMA
I am having trouble installing and finding suitable colour/media profiles, I have tried using the rasterlink6 profile updater but it just gets stuck loading on the green loading bar everytime around 50%
Followed steps to install a media profile into the input but for some reason it doesent show up in the output of rasterlink?
I am currently running mainly small size print & cut sticker jobs, 90% of the time we print with clear ink and like to do the multi layer embossed clear print effect this seems to be the main requirement in our industry.
The current vinyl being used is METAMARK MD3 monomeric vinyl, open to any suggestions or advice when it comes to choosing the correct profiles for the best colour matches, speed and quality if there ever was such a thing to bundle into one catagory
Apologies in advance if my message is long winded
All feedback and discussion is greatly welcomed
I tried searching the forum but I am unsure if I may have overlooked a post that already covers this subject.
Recently acquired a Mimaki UCJV300 and really would be grateful if anyone could point me in the right direction or share their expert knowledge, please.
When the machine was installed the only profiles that were setup without my knowledge were a few different profiles for RITRAMA
I am having trouble installing and finding suitable colour/media profiles, I have tried using the rasterlink6 profile updater but it just gets stuck loading on the green loading bar everytime around 50%
Followed steps to install a media profile into the input but for some reason it doesent show up in the output of rasterlink?
I am currently running mainly small size print & cut sticker jobs, 90% of the time we print with clear ink and like to do the multi layer embossed clear print effect this seems to be the main requirement in our industry.
The current vinyl being used is METAMARK MD3 monomeric vinyl, open to any suggestions or advice when it comes to choosing the correct profiles for the best colour matches, speed and quality if there ever was such a thing to bundle into one catagory
Apologies in advance if my message is long winded
All feedback and discussion is greatly welcomed
