• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Corel Draw 11 duplicate placement

idsign

New Member
Duplicates - Settings

Pact63

This is referenced to Corel V7 but should be same in later versions

TOOLS OPTIONS GENERAL tab

Duplicate placement and nudge

make horizontal setting 0.0 in
make vertical setting 0.0 in

That's all there is. And when you want to make up a multi-up job,

just change the placement settings to about same as or a little larger than the graphic and ctrl-D to make duplicates that are created at the offset distance you require vertically or horizontally from the original.

Like if you want to end up with a dozen in 2 columns,

duplicate the original vertially 5 times...then group and grab the 6 units and copy them - paste them back in and drag them into alignment to the right or left of the original "column" of 6.

Boom, there you go.

Barry
idsign
 

Pact63

New Member
Thanks

I had to go to one of the corel newsgroups to find out how it works. Corel changed things in v11. You can now set it on the main workspace page in the lower property bar when nothing is selected. Maybe this helps others. Thanks for everyones response.:thankyou:
 
Top