Suggestions Double Sided Banner printing on Canon Colorado 1650 HELP!

[AnchorGurl_24]

Hello,
We are currently trying to print double sided banners ( with 3" pole pockets) on the Canon Colorado 1650. Looking on YouTube there is one video I have found, from 4 years ago. Any tips or tricks would be greatly appreciated.

 

[Snydo]

Here ya go.......https://vimeopro.com/oceitcdoctrans/oce-colorado-1650-maintenance/video/435022771

 

[AnchorGurl_24]

Here ya go.......https://vimeopro.com/oceitcdoctrans/oce-colorado-1650-maintenance/video/435022771

Thank you. That is the only one that we have found as well.

 

[RabidOne]

We used to do that on Colarado's. You just have to mark where your print starts and factor in how much the machine moves the material forward when it starts a print.
We do double sided printing on our HP800 the same way.

 

[MarkSnelling]

The link Chad supplied is the best video out for double side printing.

 

[MahjongJoe]

Something I found using the double side printing: I recall some manuals canon gave us when we got the 1650 saying that you needed to use a 60” front leader and like 20” trailing when printing a double sided banner to account for one side curling, the sweet spot I got it to was 20” leading and trailing through trial and error, we use Duratex 15oz double sided banner. What they recommend for leader was nuts.