Edge FX Printhead usage

[mrmoto95]

Anyone know how to get the Printhead usage, hours/minutes. I am using Omega 2.0 and there is nothing on the web page for my FX that has anything with printhead. Thanks for any help.

 

[Tony Teveris]

If you know your FX IP address with Internet Explorer, FireFox, etc you can get to the Stat page by typing in the following:

http://<FX IP address goes here>/DiagStatsTPH.htm

something like this: http://172.20.247.200/DiagStatsTPH.htm

Hope this helps

 

[Hielorojo]

If you know your FX IP address with Internet Explorer, FireFox, etc you can get to the Stat page by typing in the following:

http://<FX IP address goes here>/DiagStatsTPH.htm

something like this: http://172.20.247.200/DiagStatsTPH.htm

Hope this helps

Hello, is there any option to get the "minutes print" directly with the "control panel" as the Gerber Edge I and II?
Thank you in advance.

 

[dreko]

I'm guessing if a previous owner resets the timer... there's no way of knowing how new or used a machine is, yes?

 

[Adam.Foster]

That would be correct. The timer is also reset if the main board is replaced.