• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Epson Dropped the Ball big time with Epson G6070 release

victor bogdanov

Active Member
1.png
 

OverkillLab

New Member
Question for you victor bogdanov ...

We now, barely, have a complete set of ink.... Had the printer for about 2 months? Have not fired it up. Distributor sales rep is not even sure of the initial setup and ink charge type situation.

Since you're up and running could you shoot some help Intel?

Are you running the USB A to USB B cable setup, LAN, or Wifi?

We have not received any maintenance liquid packs. Distributor says there should Maintenance Liquid and Cleaning Liquid. No ETA. Is the Maint. Liquid used as an initial flush on start up, or used automatically in head cleanings not by choice? Don't want to get caught with ink in the head for any length of time. Not even sure if this printer has any kind of capping station to put a "wet cap" solution in to, because I don't like diving in to things without being prepared haha
 

victor bogdanov

Active Member
Question for you victor bogdanov ...

We now, barely, have a complete set of ink.... Had the printer for about 2 months? Have not fired it up. Distributor sales rep is not even sure of the initial setup and ink charge type situation.

Since you're up and running could you shoot some help Intel?

Are you running the USB A to USB B cable setup, LAN, or Wifi?

We have not received any maintenance liquid packs. Distributor says there should Maintenance Liquid and Cleaning Liquid. No ETA. Is the Maint. Liquid used as an initial flush on start up, or used automatically in head cleanings not by choice? Don't want to get caught with ink in the head for any length of time. Not even sure if this printer has any kind of capping station to put a "wet cap" solution in to, because I don't like diving in to things without being prepared haha
The maintenence liquid is required, you won't be able to ink up without it.

Ink up is all automated , watch the epson videos on set up.

Once you turn on the printer it'll walk you through ink up.

Im using ethernet connection etc was like any other epson printer, pretty straight forward/fool proof.
 

OverkillLab

New Member
The maintenence liquid is what it does wet capping with im guessing

Cleaning Liquid is if you're not printing for extended time, flush the ink with it

That's kind of how I saw it also... We have other cleaning and maintenance products from our current dtf printers, but I'm worried without the maintenance liquid pack, it will want to push solution into the capping station and it's not there...


Back at a stand still with that printer
 

victor bogdanov

Active Member
That's kind of how I saw it also... We have other cleaning and maintenance products from our current dtf printers, but I'm worried without the maintenance liquid pack, it will want to push solution into the capping station and it's not there...


Back at a stand still with that printer
you wont even get that far, it wont let you click next to start ink-up until you insert all the required ink + maintenance pack
 
Top