Signguruniagara
New Member
Hi all!
I’m having the error code 79:04 come up when I’m half way through a print job. My machine is an HP latex 570. In the last month I’ve had to replace the belt. I had a head strike the other day and it took out my magenta yellow print head. I didn’t have another one on the shelf so I used and old one. It seem to work after so I sent another print job and it stopped half way through with the same error. I then ordered new print heads and when I started the machine again the black cyan print head had an X through it. I replaced the black cyan print head and sent another job. It again stopped half way through with the same error. If anyone could give me some insight on this that would be great. I’m only a year into this industry and I hate to have to call a tech again cause this machine has already cost me a ton of money over the first year.
I’m having the error code 79:04 come up when I’m half way through a print job. My machine is an HP latex 570. In the last month I’ve had to replace the belt. I had a head strike the other day and it took out my magenta yellow print head. I didn’t have another one on the shelf so I used and old one. It seem to work after so I sent another print job and it stopped half way through with the same error. I then ordered new print heads and when I started the machine again the black cyan print head had an X through it. I replaced the black cyan print head and sent another job. It again stopped half way through with the same error. If anyone could give me some insight on this that would be great. I’m only a year into this industry and I hate to have to call a tech again cause this machine has already cost me a ton of money over the first year.