• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Need Help Error message recall

kiri

New Member
Hi, I have an annoying issue were i hear a sound of an error occuring but can never see it as its gone by the time i reach the printer. Does anyone know if there's a way to recall the history or pending errors?
I've checked the manual but haven't landed on anything. Machine is Mimaki LX400-160 but I assume most JV printers would also be similar in software menus. Cheers
 

netsol

Active Member
I am not an expert on mimaki, but there has to be a way to print error log
(Print last 20 errors, if nothing else)
Service menu?
 

Impact1

Wide Format Technical Solutions
Under the “information” menu you can pull up the error history. Directions are located in the operating manual.
 

Solventinkjet

DIY Printer Fixing Guide
I agree with Impact1. Also, errors that pop up while printing but don't stop the print are almost always basic errors like an ink cartridge being near end, the heater has reached it's proper temp, or maybe all 8 cartridge slots aren't being used etc.
 
Top