• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Flexi position print problem

osam

New Member
Hi ,i use flexi 19 ,
In flexi set up printing position for example x150y150mm
Go to RIP and print (printmon) y distance print ok but x print always ziro.
No mather of what,x print always ziro.
I have feeling that this function useless ask seller and he agree that this current version of software not suported this function.
Does any bady what could tobe problem,i hope so that is not machine.
Thanks a lot
 

Attachments

  • 20221120_162651.jpg
    20221120_162651.jpg
    1.2 MB · Views: 222
  • 20221120_163539.jpg
    20221120_163539.jpg
    757.4 KB · Views: 114

osam

New Member
Hi ,i use flexi 19 ,
In flexi set up printing position for example x150y150mm
Go to RIP and print (printmon) y distance print ok but x print always ziro.
No mather of what,x print always ziro.
I have feeling that this function useless ask seller and he agree that this current version of software not suported this function.
Does any bady what could tobe problem,i hope so that is not machine.
Thanks a lot
Thanks,friend
 

Mike Paul

Super Active Member
Uncheck the box next to " reset" at the bottom left.
Should be good to go...

That's why it's centering on the media size instead of the front of the material..
 
Last edited:
Top