How long will this take me to wrap?

[Stacey K]

I plan to use Polar Tac (per Geneva) to wrap this 3-sided brick area. I've never wrapped brick and obviously it's going to take longer...

How long will/should this take me so I can figure out an estimate, thanks! (If you want to shoot a price out, feel free LOL)

 

[Mike Paul]

ACM with standoffs not an option?

 

[Texas_Signmaker]

all day

 

[RyanECS]

I plan to use Polar Tac (per Geneva) to wrap this 3-sided brick area. I've never wrapped brick and obviously it's going to take longer...

How long will/should this take me so I can figure out an estimate, thanks! (If you want to shoot a price out, feel free LOL)

View attachment 179154 View attachment 179155

If you have the proper roller for brick/rough surfaces to use with a heat gun, this should be 4 hours or so….

 

[rydods]

I would say that 8' x 14' area would take roughly 2 hours. 1/2 hour to 45 to lineup and apply and 1 1/2 hours to roll it on depending on the depth of the grout lines. If you have a helper who can help you roll, that would be nice. Make sure they practice if you're giving them a torch. LOL

 

[Stacey K]

ACM with standoffs not an option?

I'll be doing one stand-off on the right side. This is just a quick idea of what they want...they are getting one of those screens from Rocket Screens for their Hall of Fame vs. all the boards around the school. The only problem is there are two ticket boxes that they need to remove and fill in with drywall or something so there will be two smooth boxes and the rest brick looking. The other option is that they drywall the entire area and paint, of course. I sent them some pictures of what the vinyl looks like on brick so they can decide. ACM boards are an option also.

 

[Stacey K]

So basically, 4 hours to all day, and I should allow all day since I've never done this before LOL Kinda what I was thinking, thanks!!