Hp Latex 360 Printing problems .

[Mr.Bundy]

I have replace all the ink. I change out all the heads had to do manual head alignment because of the ink bleed. There is a picture below . I have tried different Media and profiles and still no luck

I’m not sure where to turn now . machine does not show any errors.

 

[greysquirrel]

Are you using oem ink? What profile? What media?

 

[ToTo]

I guess you have a problem with optimizer. Check the nozzle test, in the black rectangle you see the nozzle pattern of OP.

 

[balstestrat]

This one picture says nothing.

Say start from the nozzle check and move on from there

 

[Mr.Bundy]

Are you using oem ink? What profile? What media

Yes I am using OEM inks HP Prime Gloss CP 10p 100. HP Prime Gloss CP

 

[Mr.Bundy]

Here are more pictures

 

[Mr.Bundy]

Here is more pictures

 

[balstestrat]

Take a good picture of the dark area next to 1.

 

[Mr.Bundy]

Here is the black part I don't see a problem with the black

 

[balstestrat]

But I see. Your optimizer is missing completely.
There is 0 nozzle firing. You need to fix that.

 

[Mr.Bundy]

But I see. Your optimizer is missing completely.
There is 0 nozzle firing. You need to fix that.

Is there a service manual for servicing the optimizer? I do not see a leak, and these are new heads

 

[balstestrat]

There isn't too much to it. Clean the contacts. Try with the old printhead.

You can also warranty the "faulty" one you have and try with another new one.

 

[Mr.Bundy]

I have replaced optimizer cartage, I have replaced optimizer print head. I have replaced trailing cable since its started to tell me trailing cable not connected so I replaced it . Still not getting optimizer. what should I do know.