I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
i was trying to pull some ink thru the waste line and it wiggle up in the cap, and i pulled it with a needle nose plier, and it broke off. now i cant pull ink thru... any advice? i've searched for a part and i'm getting nowhere
Which part of the waste line? There are lines from each cap top that go into the pump, then a single line that comes out of the pump into the bottle.
If it is the one from the cap top you have probably just pulled the line loose from the bottom of the cap top
OK, you will need to remove the cap top and take it out and see if the hose has just come detached from bottom of it. If it has, just push it back on and it should work fine.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.